Counterweight - Remove and Install
Removal Procedure
- Start the machine. Place the bucket on the ground. Stop the engine.
- Open the hood of the machine.
- Fasten a suitable lifting device to the counterweight, as shown.
Show/hide table
Illustration 1 | g00363768 |
- Remove four bolts (1) and the spacers that hold the counterweight to the swing frame of the machine. Remove the counterweight. The weight of the counterweight is approximately 3600 kg (7950 lb).
Show/hide table
Illustration 2 | g00363796 |
This view is below the counterweight. |
Installation Procedure
- Put 4C-5592 Anti-Seize Compound on the threads of four mounting bolts (1) and the face of the four spacers.
Show/hide table
Illustration 3 | g00363796 |
This view is below the counterweight. |
- Fasten a suitable lifting device to the counterweight, as shown. The weight of the counterweight is 3600 kg (7950 lb).
Show/hide table
Illustration 4 | g00363768 |
- Install the four spacers and four bolts (1) that hold the counterweight to the swing frame of the machine.
- Close the hood of the machine.
Caterpillar Information System:
M318 and M320 Excavators Machine System Specifications Control Valve (Boom Lowering)
330B Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
315B Excavator Machine Systems Boom - Install
M322C Wheeled Excavator Machine System Swing Gear and Bearing
M315 Excavator Machine System Stick - 1.7 m (5.58 ft)
M318 and M320 Excavators Machine System Specifications Travel Motor
Installation of the Two-Way Pilot Valve (Control Pattern Change) {5059, 5496} Installation of the Two-Way Pilot Valve (Control Pattern Change) {5059, 5496}
330B Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
315B Excavator Machine Systems Swing Drive - Disassemble
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic System Pressure - Release
317B L and 317B LN Excavators Excavator Systems Swing Drive - Remove and Install
330B Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
315B Excavator Machine Systems Fuel Tank - Remove
315B Excavator Machine Systems Swing Drive - Assemble
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Install
320B, 320B L and 320B N Excavators Work Tool Flow Control - If Equipped
M315 Excavator Machine System Stick - 2.1 m (6.89 ft)
M315 Excavator Machine System Stick - 2.4 m (7.87 ft)
M315 Excavator Machine System Stick - 2.6 m (8.53 ft)
M315 Excavator Machine System Stick - 3.1 m (10.17 ft)
5130B Excavator Hydraulic System Relief Valve (Margin)
315B Excavator Machine Systems Undercarriage Frame - Remove
315B Excavator Machine Systems Fuel Tank - Install
5230 Excavator Hydraulic System Hydraulic System Troubleshooting