Stick - 2.6 m (8.53 ft)
Show/hide table
 | |
| Illustration 1 | g03329421 |
Show/hide table
| Specification for 118-7508 Hoe Stick Gp | |||
| Item | Qty | Part | Specification Description |
| - | All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, bucket, bushings, and the cylinder pin bores. | ||
| 1 | 1 | 093-0065 Shim | As required, use the shim of thickness 1.0 mm (0.04 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch). |
| 2 | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch): |
||
| 1 | 133-2717 Shim | Thickness is 0.5 mm (0.02 inch). |
|
| 1 | 099-7091 Shim | Thickness is 1.5 mm (0.06 inch). |
|
| 3 | 2 | 172-5853 Pin As | Diameter is 59.850 ± 0.025 mm (2.3563 ± 0.0010 inch). |
| 4 | 2 | 8T-4780 Bolt | Torque to 325 ± 40 N·m (240 ± 30 lb ft). |
| 5 | 2 | 114-4866 Bushing | Bore before assembly is 50.180 ± 0.020 mm (1.9756 ± 0.0008 inch). |
| Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
| 6 | 2 | 114-4850 Lip Type Seal | Lubricate lightly with lubricant that is being sealed. |
| 7 | 2 | 113-4982 Bushing | Bore before assembly is 70.230 ± 0.020 mm (2.7650 ± 0.0008 inch). |
| Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
| 8 | 4 | 093-1434 Lip Type Seal | Lubricate lightly with lubricant that is being sealed. |
| 9 | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch): |
||
| 1 | 133-2717 Shim | Thickness is 0.5 mm (0.02 inch). |
|
| 1 | 099-7091 Shim | Thickness is 1.5 mm (0.06 inch). |
|
| 10 | 1 | 093-0065 Shim | As required, use the shim of thickness 1.0 mm (0.04 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch). |
| 11 | 1 | 128-7656 Bushing | Bore before assembly is 70.230 ± 0.020 mm (2.7650 ± 0.0008 inch). |
| Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
Caterpillar Information System:
M315 Excavator Machine System Stick - 2.4 m (7.87 ft)
M315 Excavator Machine System Stick - 2.1 m (6.89 ft)
320B, 320B L and 320B N Excavators Work Tool Flow Control - If Equipped
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Install
315B Excavator Machine Systems Swing Drive - Assemble
315B Excavator Machine Systems Fuel Tank - Remove
315B Excavator Machine Systems Counterweight - Remove and Install
M318 and M320 Excavators Machine System Specifications Control Valve (Boom Lowering)
330B Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
315B Excavator Machine Systems Boom - Install
M322C Wheeled Excavator Machine System Swing Gear and Bearing
M315 Excavator Machine System Stick - 1.7 m (5.58 ft)
M315 Excavator Machine System Stick - 3.1 m (10.17 ft)
5130B Excavator Hydraulic System Relief Valve (Margin)
315B Excavator Machine Systems Undercarriage Frame - Remove
315B Excavator Machine Systems Fuel Tank - Install
5230 Excavator Hydraulic System Hydraulic System Troubleshooting
315B Excavator Machine Systems Seat - Remove and Install
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Remove
M315 Excavator Machine System Bucket Cylinder
315B Excavator Machine Systems Cab - Remove
330B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Install
330B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil