Bucket Cylinder
Show/hide table
Illustration 1 | g03322392 |
Show/hide table
Specification for 114-9312 Bucket Cylinder Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 111-7608 Bushing     | Bore before assembly is 60.180 ± 0.020 mm (2.3693 ± 0.0008 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
A     | 1     | 114-9317 Cylinder As     | Bore diameter is 100.00 mm (3.937 inch).     |
B     | 1     | 136-6022 Rod As     | Diameter is 69.93 ± 0.03 mm (2.753 ± 0.001 inch).     |
C     | 1     | 374-5153 Head     | Bore over two lands is 70.53 ± 0.03 mm (2.777 ± 0.001 inch).     |
2     | 1     | 111-7609 Bushing     | Bore before assembly is 60.180 ± 0.020 mm (2.3693 ± 0.0008 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
3     | 1     | 143-8149 Special Locknut     | Before assembly, apply 309-6932 Hydraulic Oil to the face and threads.     |
Torque to 2900 ± 145 N·m (2139 ± 107 lb ft). |
|||
4     | 1     | 119-5456 Ring     | Lubricate the inside diameter and the outside diameter with clean grease.     |
5     | 1     | 9X-7298 Seal As     | Lubricate the inside diameter and the outside diameter with clean grease.     |
6     | 1     | 143-8025 Ring     | Lubricate the inside diameter and the outside diameter with clean grease.     |
7     | 1     | 6I-6922 Seal Ring     | Slit of ring must turn in direction of piston.     |
8     | 1     | 114-0753 Bushing     | Outer Diameter is 75.120 ± 0.025 mm (2.9575 ± 0.0010 inch).     |
Thickness is 2.475 ± 0.025 mm (0.0974 ± 0.0010 inch). |
|||
9     | 1     | 170-9841 Buffer Seal     | Lubricate lightly with lubricant that is being sealed.     |
10     | 1     | 170-9857 U-Cup Seal     | Lubricate lightly with lubricant that is being sealed.     |
11     | 1     | 165-9283 Lip Type Seal     | Lubricate lightly with lubricant that is being sealed.     |
12     | -     | -     | Before assembly, apply green loctite 601 or loctite 609 to the wiper seal groove.     |
Caterpillar Information System:
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Remove
315B Excavator Machine Systems Seat - Remove and Install
5230 Excavator Hydraulic System Hydraulic System Troubleshooting
315B Excavator Machine Systems Fuel Tank - Install
315B Excavator Machine Systems Undercarriage Frame - Remove
5130B Excavator Hydraulic System Relief Valve (Margin)
M315 Excavator Machine System Stick - 3.1 m (10.17 ft)
M315 Excavator Machine System Stick - 2.6 m (8.53 ft)
M315 Excavator Machine System Stick - 2.4 m (7.87 ft)
M315 Excavator Machine System Stick - 2.1 m (6.89 ft)
320B, 320B L and 320B N Excavators Work Tool Flow Control - If Equipped
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Install
315B Excavator Machine Systems Cab - Remove
330B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Install
330B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
330B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
315B and 315B L Excavator Supplement For 3046 Engine Coolant Tank (Expansion) - Remove and Install
5130 Excavator Hydraulic System Check Valve (Swing and Travel Back Pressure)
315B Excavator Machine Systems Cab - Install
M318 and M320 Excavators Machine System Specifications Control Valve (Boom Lowering)
330B Excavator Hydraulic System Gear Pump (Pilot) - Test
315B and 315B L Excavator Supplement For 3046 Engine Engine and Piston Pump - Remove
315B Excavator Machine Systems Track Carrier Roller - Disassemble