315B Excavator Machine Systems Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g00480925

1. Fasten a hoist to the lifting bracket on top of cab (24), as shown. Carefully position the cab on the platform. The weight of the cab is 288 kg (635 lb).

Show/hide table



Illustration 2	g00365052

2. Install nine bolts (22) that hold the cab to platform (23) .

Show/hide table



Illustration 3	g00364983

3. Connect electrical connectors (20) and (21) .

Show/hide table



Illustration 4	g00364982

4. Connect electrical connectors (18) and (19) .

Show/hide table



Illustration 5	g00364978

5. Put cover (16) in position at the rear of the cab. Install the washers and two bolts (17) that hold the cover in place.

Show/hide table



Illustration 6	g00364952

6. Put box (13) in position at the rear of the cab. Install four screws (14) .

7. Install wiring harness (15) on the side of box (13) .

Show/hide table



Illustration 7	g00364899

8. Connect hose (12) to box (13) .

Show/hide table



Illustration 8	g00364896

9. Install cover (11) and four screws (10). Close rear compartment door (9) .

Show/hide table



Illustration 9	g00364838

10. Install four screws (8) in the cover at the rear of the cab.

Show/hide table



Illustration 10	g00364837

11. Connect air duct (7) to elbow (6) .

Show/hide table



Illustration 11	g00364832

12. Position cover (5) in the cab. Install three screws (4) .

Show/hide table



Illustration 12	g00364812

13. Carefully install rubber floormat (3) in the cab.

Show/hide table



Illustration 13	g00364712

14. Position guard (2). Install three screws (1) that hold the guard.