Coolant Tank (Expansion) - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hoses (1) .
Show/hide table
 | |
| Illustration 1 | g00365082 |
- Remove bolts (2) and the washers.
- Remove bracket (3) .
- Remove expansion tank (4) .
Installation Procedure
- Position expansion tank (4) .
Show/hide table
| | |
| Illustration 2 | g00365082 |
- Install bracket (3) .
- Install the washers and bolts (2) .
- Connect hoses (1) .
- Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct filling procedure.
Caterpillar Information System:
330B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
330B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Install
330B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
315B Excavator Machine Systems Cab - Remove
M315 Excavator Machine System Bucket Cylinder
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Remove
315B Excavator Machine Systems Seat - Remove and Install
5230 Excavator Hydraulic System Hydraulic System Troubleshooting
315B Excavator Machine Systems Fuel Tank - Install
315B Excavator Machine Systems Undercarriage Frame - Remove
5130B Excavator Hydraulic System Relief Valve (Margin)
5130 Excavator Hydraulic System Check Valve (Swing and Travel Back Pressure)
315B Excavator Machine Systems Cab - Install
M318 and M320 Excavators Machine System Specifications Control Valve (Boom Lowering)
330B Excavator Hydraulic System Gear Pump (Pilot) - Test
315B and 315B L Excavator Supplement For 3046 Engine Engine and Piston Pump - Remove
315B Excavator Machine Systems Track Carrier Roller - Disassemble
M315 Excavator Machine System Boom Cylinder
330B Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
M312 Excavator Machine System Bucket Sidecutter
315B Excavator Machine Systems Undercarriage Frame - Install
M318 and M320 Excavators Machine System Specifications Flow Control Valve
M315 Excavator Machine System Boom Cylinder