Seat - Remove and Install
Removal Procedure
- Open the cab door. Lock the cab door in the OPEN position.
- Remove four socket head bolts (1) .
Show/hide table
Illustration 1 | g00364592 |
- If the seat assembly is equipped with a seat heater, disconnect the wiring harness for the seat heater.
- Use two people to remove seat assembly (2) from the cab. The weight of the seat assembly is approximately 34 kg (75 lb).
Installation Procedure
- Use two people to position seat assembly (2) in the cab. The weight of the seat assembly is approximately 34 kg (75 lb).
Show/hide table
Illustration 2 | g00364592 |
- Install the four socket head bolts (1) .
- If the seat assembly is equipped with a seat heater, connect the wiring harness for the seat heater.
- Sit in the seat assembly with the operator's back against the back of the seat assembly. Adjust the seat assembly so that the operator is able to move the pedals completely forward and rearward. Refer to Operation and Maintenance Manual, "Seat Adjustment" for more information.
- Close the door to the cab.
Caterpillar Information System:
5230 Excavator Hydraulic System Hydraulic System Troubleshooting
315B Excavator Machine Systems Fuel Tank - Install
315B Excavator Machine Systems Undercarriage Frame - Remove
5130B Excavator Hydraulic System Relief Valve (Margin)
M315 Excavator Machine System Stick - 3.1 m (10.17 ft)
M315 Excavator Machine System Stick - 2.6 m (8.53 ft)
M315 Excavator Machine System Stick - 2.4 m (7.87 ft)
M315 Excavator Machine System Stick - 2.1 m (6.89 ft)
320B, 320B L and 320B N Excavators Work Tool Flow Control - If Equipped
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Install
315B Excavator Machine Systems Swing Drive - Assemble
315B Excavator Machine Systems Fuel Tank - Remove
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Remove
M315 Excavator Machine System Bucket Cylinder
315B Excavator Machine Systems Cab - Remove
330B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
315B and 315B L Excavator Supplement For 3046 Engine Radiator - Install
330B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
330B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
315B and 315B L Excavator Supplement For 3046 Engine Coolant Tank (Expansion) - Remove and Install
5130 Excavator Hydraulic System Check Valve (Swing and Travel Back Pressure)
315B Excavator Machine Systems Cab - Install
M318 and M320 Excavators Machine System Specifications Control Valve (Boom Lowering)
330B Excavator Hydraulic System Gear Pump (Pilot) - Test