Blade Control - If Equipped
Show/hide table
Illustration 1 | g00365772 |
Show/hide table
Float (1) - Push the lever forward to the detent position. The blade will lower to the ground. The blade will float with the contour of the ground. The lever will remain in the FLOAT position until the lever is released from the detent position. After the lever is released, the lever will return to the HOLD position. |
Show/hide table
Lower (2) - Push the lever forward in order to lower the blade. The lever will return to the HOLD position when you release the lever. The blade will remain in the selected position. |
Hold (3) - The lever will return to the HOLD position, when you release the lever from the RAISE position or from the LOWER position. The blade will remain in the selected position.
Show/hide table
Raise (4) - Pull the lever backward in order to raise the blade. The lever will return to the HOLD position when you release the lever. The blade will remain in the selected position. |
Caterpillar Information System:
M315 Excavator Machine System Boom Cylinder
M318 and M320 Excavators Machine System Specifications Flow Control Valve
315B Excavator Machine Systems Undercarriage Frame - Install
M312 Excavator Machine System Bucket Sidecutter
330B Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
M315 Excavator Machine System Boom Cylinder
315B Excavator Machine Systems Track Carrier Roller - Disassemble
315B and 315B L Excavator Supplement For 3046 Engine Engine and Piston Pump - Remove
330B Excavator Hydraulic System Gear Pump (Pilot) - Test
M318 and M320 Excavators Machine System Specifications Control Valve (Boom Lowering)
315B Excavator Machine Systems Cab - Install
5130 Excavator Hydraulic System Check Valve (Swing and Travel Back Pressure)
315B Excavator Machine Systems Swing Gear and Bearing - Remove and Install
307B Excavator Windshield
318B Excavator Cab Door
M315 Excavator Machine System Boom Cylinder
315B Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
M312 Excavator Machine System Relief Valve (Line)
330B Excavator Hydraulic System Relief Valve (Travel Motor) - Test and Adjust
3412 Generator Set Engines Cylinder Block
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Plate Locations and Film Locations
M312 Excavator Machine System Solenoid Valve
5130B Excavator Hydraulic System Operational Checks
M318 and M320 Excavators Machine System Specifications Check Valve (Stick Drift Reduction)