Boom Cylinder
Show/hide table
Illustration 1 | g03317079 |
Show/hide table
Specification for 113-4989 Boom Cylinder Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 258-8503 Bushing     | Bore before assembly is 70.27 ± 0.04 mm (2.767 ± 0.002 inch).     |
Installation depth is 6.5 ± 0.5 mm (0.26 ± 0.02 inch). |
|||
A     | 1     | 113-4981 Cylinder As     | Bore diameter is 110.027 ± 0.027 mm (4.3318 ± 0.0011 inch).     |
B     | 1     | 172-1027 Cylinder Rod and Bearing As     | Diameter is 79.93 ± 0.03 mm (3.147 ± 0.001 inch).     |
C     | 1     | 112-6449 Head     | Bore over two lands is 80.53 ± 0.03 mm (3.170 ± 0.001 inch).     |
2     | 1     | 143-3838 Bushing     | Bore before assembly is 80.250 to 80.337 mm (3.1594 to 3.1629 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
3     | 1     | 143-8150 Special Locknut     | Before assembly, apply 309-6932 Hydraulic Oil to the face and threads.     |
Torque to 4500 ± 230 N·m (3319 ± 170 lb ft). |
|||
4     | 1     | 133-6678 Ring     | Lubricate the inside diameter and the outside diameter with clean grease.     |
5     | 1     | 9X-7301 Seal As     | Lubricate the inside diameter and the outside diameter with clean grease.     |
6     | 1     | 160-0033 Ring     | Lubricate the inside diameter and the outside diameter with clean grease.     |
7     | 1     | 103-8341 Seal Ring     | Slit of ring must turn in direction of piston.     |
8     | 1     | 114-0755 Bushing     | Outside diameter is 85.133 ± 0.033 mm (3.3517 ± 0.0013 inch).     |
Thickness is 2.475 ± 0.025 mm (0.0974 ± 0.0010 inch). |
|||
9     | 1     | 170-9843 Buffer Seal     | Lubricate lightly with lubricant that is being sealed.     |
10     | 1     | 170-9859 U-Cup Seal     | Lubricate lightly with lubricant that is being sealed.     |
11     | 1     | 165-9285 Lip Type Seal     | Lubricate lightly with lubricant that is being sealed.     |
12     | -     | -     | Before assembly, apply green Loctite 601 or Loctite 609 to the wiper seal groove.     |
Caterpillar Information System:
318B Excavator Cab Door
307B Excavator Windshield
315B Excavator Machine Systems Swing Gear and Bearing - Remove and Install
307B Excavator Blade Control - If Equipped
M315 Excavator Machine System Boom Cylinder
M318 and M320 Excavators Machine System Specifications Flow Control Valve
315B Excavator Machine Systems Undercarriage Frame - Install
M312 Excavator Machine System Bucket Sidecutter
330B Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
M315 Excavator Machine System Boom Cylinder
315B Excavator Machine Systems Track Carrier Roller - Disassemble
315B and 315B L Excavator Supplement For 3046 Engine Engine and Piston Pump - Remove
315B Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
M312 Excavator Machine System Relief Valve (Line)
330B Excavator Hydraulic System Relief Valve (Travel Motor) - Test and Adjust
3412 Generator Set Engines Cylinder Block
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Plate Locations and Film Locations
M312 Excavator Machine System Solenoid Valve
5130B Excavator Hydraulic System Operational Checks
M318 and M320 Excavators Machine System Specifications Check Valve (Stick Drift Reduction)
M312 Excavator Machine System Pilot Control Valve (Auxiliary)
330B Excavator Hydraulic System Operational Checks
307B Excavator Offset Boom Control - If Equipped
315B Excavator Machine Systems Track Carrier Roller - Assemble