Stick - 1.7 m (5.58 ft)
Show/hide table
Illustration 1 | g03317954 |
Show/hide table
Specification for 118-7505 Hoe Stick Gp     | |||
Item     | Qty     | Part     | Specification Description     |
-     | All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, bucket, bushings, and the cylinder pin bores.     | ||
1     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 133-2717 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 093-0065 Shim     | Thickness is 1.0 mm (0.04 inch)     |
|
2     | 1     | 099-7091 Shim     | As required, use the shim of thickness 1.5 mm (0.06 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch).     |
3     | 2     | 113-4982 Bushing     | Bore before assembly is 70.230 ± 0.020 mm (2.7650 ± 0.0008 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
4     | 4     | 093-1434 Lip Type Seal     | Lubricate lightly with lubricant that is being sealed.     |
5     | 2     | 172-5853 Pin As     | Diameter is 59.850 ± 0.025 mm (2.3563 ± 0.0010 inch).     |
6     | 2     | 114-4866 Bushing     | Bore before assembly is 50.180 ± 0.020 mm (1.9756 ± 0.0008 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
7     | 2     | 114-4850 Lip Type Seal     | Lubricate lightly with lubricant that is being sealed.     |
8     | 2     | 8T-4780 Bolt     | Torque to 325 ± 40 N·m (240 ± 30 lb ft).     |
9     | As required, use the following shims in order to adjust the maximum lateral clearance of 1.0 mm (0.04 inch):     |
||
1 | 133-2717 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
1 | 093-0065 Shim     | Thickness is 1.0 mm (0.04 inch)     |
|
10     | 1     | 099-7091 Shim     | As required, use the shim of thickness 1.5 mm (0.06 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch).     |
11     | 2     | 128-7656 Bushing     | Bore before assembly is 70.230 ± 0.020 mm (2.7650 ± 0.0008 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
Caterpillar Information System:
M318 and M320 Excavators Machine System Specifications Travel Motor
Installation of the Two-Way Pilot Valve (Control Pattern Change) {5059, 5496} Installation of the Two-Way Pilot Valve (Control Pattern Change) {5059, 5496}
330B Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
315B Excavator Machine Systems Swing Drive - Disassemble
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic System Pressure - Release
317B L and 317B LN Excavators Excavator Systems Swing Drive - Remove and Install
330B Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Remove
315B Excavator Machine Systems Boom - Remove
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Travel Alarm - Test - If Equipped
315B Excavator Machine Systems Boom Cylinder - Install
5130B Excavator Hydraulic System Visual Inspection
M322C Wheeled Excavator Machine System Swing Gear and Bearing
315B Excavator Machine Systems Boom - Install
330B Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
M318 and M320 Excavators Machine System Specifications Control Valve (Boom Lowering)
315B Excavator Machine Systems Counterweight - Remove and Install
315B Excavator Machine Systems Fuel Tank - Remove
315B Excavator Machine Systems Swing Drive - Assemble
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Install
320B, 320B L and 320B N Excavators Work Tool Flow Control - If Equipped
M315 Excavator Machine System Stick - 2.1 m (6.89 ft)
M315 Excavator Machine System Stick - 2.4 m (7.87 ft)
M315 Excavator Machine System Stick - 2.6 m (8.53 ft)