Visual Inspection
A visual inspection of the system is the first step of troubleshooting a problem. In order to perform the inspection, turn off the engine and lower the implements to the ground.
- Check the level of the oil in the hydraulic tank.
- Inspect all lines and connections for damage or leaks.
- Remove all of the elements in the high pressure screens and check the elements for material that would indicate damage to a component.
- Inspect the control linkage from the hydraulic activation control selector valve for bent components, broken components or damaged components.
Caterpillar Information System:
317B L and 317B LN Excavators Excavator Systems Boom Cylinder - Assemble
330B Excavator Hydraulic System Pressure Specifications
5130B Excavator Hydraulic System General Information
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Swing Frame and Cylinder Bearings - Lubricate
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Track (Rubber) - Inspect/Replace - If Equipped
315B Excavator Machine Systems Swing Motor - Assemble
320B, 320B L and 320B N Excavators Work Tool Control (Two-Way Flow) - If Equipped
317B L and 317B LN Excavators Excavator Systems Boom Cylinder - Disassemble
315B Excavator Machine Systems Boom Cylinder - Remove
315B and 315B L Excavator Supplement For 3046 Engine Refrigerant Compressor - Remove and Install
315B Excavator Machine Systems Stick - Install
315B and 315B L Excavator Supplement For 3046 Engine Crankshaft Vibration Damper and Pulley - Remove and Install
315B Excavator Machine Systems Boom Cylinder - Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Travel Alarm - Test - If Equipped
315B Excavator Machine Systems Boom - Remove
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Remove
330B Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
317B L and 317B LN Excavators Excavator Systems Swing Drive - Remove and Install
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic System Pressure - Release
315B Excavator Machine Systems Swing Drive - Disassemble
330B Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
Installation of the Two-Way Pilot Valve (Control Pattern Change) {5059, 5496} Installation of the Two-Way Pilot Valve (Control Pattern Change) {5059, 5496}
M318 and M320 Excavators Machine System Specifications Travel Motor
M315 Excavator Machine System Stick - 1.7 m (5.58 ft)