Travel Alarm - Test - If Equipped
You must move the machine in order to test the travel alarm.
- Start the engine. Move the left and right consoles for the hydraulic lockout control to the LOWERED position.
- Raise the work tool. Make sure that there is adequate overhead clearance.
Show/hide table
Illustration 1 g00363053 - Use the travel levers to move the machine forward. The travel alarm should sound.
- Release the travel levers in order to stop the machine.
- Use the travel levers to move the machine backward. The travel alarm should sound.
- Release the travel levers in order to stop the machine. Lower the work tool to the ground. Move the left and/or right consoles for the hydraulic lockout control to the RAISED position. Stop the engine.
Caterpillar Information System:
315B Excavator Machine Systems Boom Cylinder - Install
5130B Excavator Hydraulic System Visual Inspection
317B L and 317B LN Excavators Excavator Systems Boom Cylinder - Assemble
330B Excavator Hydraulic System Pressure Specifications
5130B Excavator Hydraulic System General Information
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Swing Frame and Cylinder Bearings - Lubricate
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Track (Rubber) - Inspect/Replace - If Equipped
315B Excavator Machine Systems Swing Motor - Assemble
320B, 320B L and 320B N Excavators Work Tool Control (Two-Way Flow) - If Equipped
317B L and 317B LN Excavators Excavator Systems Boom Cylinder - Disassemble
315B Excavator Machine Systems Boom Cylinder - Remove
315B and 315B L Excavator Supplement For 3046 Engine Refrigerant Compressor - Remove and Install
315B Excavator Machine Systems Boom - Remove
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic Oil Cooler - Remove
330B Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
317B L and 317B LN Excavators Excavator Systems Swing Drive - Remove and Install
315B and 315B L Excavator Supplement For 3046 Engine Hydraulic System Pressure - Release
315B Excavator Machine Systems Swing Drive - Disassemble
330B Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
Installation of the Two-Way Pilot Valve (Control Pattern Change) {5059, 5496} Installation of the Two-Way Pilot Valve (Control Pattern Change) {5059, 5496}
M318 and M320 Excavators Machine System Specifications Travel Motor
M315 Excavator Machine System Stick - 1.7 m (5.58 ft)
M322C Wheeled Excavator Machine System Swing Gear and Bearing
315B Excavator Machine Systems Boom - Install