PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL PAN GASKET ON CERTAIN M313D, M315D, M315D 2, AND M317D 2 WHEELED EXCAVATORS
Usage:
TEBE5536-00
Show/hide table
| 28Nov2016 |
U-621
A-446
D-520
O-522
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL PAN GASKET ON CERTAIN M313D, M315D, M315D 2, AND M317D 2 WHEELED EXCAVATORS |
|
| 1302 | PS53351 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53351" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Nov2018 |
PROBLEM
Show/hide table
| The existing oil pan gasket can leak on certain M313D, M315D, M315D 2, and M317D 2 Wheeled Excavators. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| M313D | J3A00128-00759 K3D00113-00305, 307, 310, 315-1147 |
| M315D | J5B00224-00263, 265-292, 294-511, 513-628 K5E00137-00787 |
| M315D 2 | CH300156-00367, 370-426 |
| M317D 2 | CH500209-00408 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 4712882 | GASKET-SUMP |
| 1 | BULK_OIL | ENGINE OIL - See OMM (9.5 Litres) |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Replace the oil pan gasket with a 4712882 Gasket. Refer to Disassembly and Assembly, KENR6082, "Engine Oil Pan - Remove and Install". |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOAD SENSE DRAIN VALVE ON CERTAIN M313D, M314F, M315D, M315D2, M315F, M316D, M316F, M317D2, M318D, M320D2, M322D, M322D2, AND M324D2 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOAD SENSE DRAIN VALVE ON CERTAIN M313D, M314F, M315D, M315D2, M315F, M316D, M316F, M317D2, M318D, M320D2, M322D, M322D2, AND M324D2 WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR ADDING A HANDRAIL ON CERTAIN 374F EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR ADDING A HANDRAIL ON CERTAIN 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAT GRADE ASSIST KIT ON CERTAIN 323E AND 323F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAT GRADE ASSIST KIT ON CERTAIN 323E AND 323F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE MAIN CONTROL VALVE HOSES ON CERTAIN 301.7D CR MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REROUTING THE MAIN CONTROL VALVE HOSES ON CERTAIN 301.7D CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THERMAL FUSE ON CERTAIN 336E AND 336F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THERMAL FUSE ON CERTAIN 336E AND 336F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CAT GRADE ASSIST ON CERTAIN 323F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING CAT GRADE ASSIST ON CERTAIN 323F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK MODULES ON CERTAIN EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK MODULES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE WIRING HARNESS AND HARNESS SUPPORT BRACKET ON CERTAIN 311F, AND 312F GC EXCAVATORS WITH EXTENDED RUNNING HOURS THAT ARE LOCATED IN JAPAN PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE WIRING HARNESS AND HARNESS SUPPORT BRACKET ON CERTAIN 311F, AND 312F GC EXCAVATORS WITH EXTENDED RUNNING HOURS THAT ARE LOCATED IN JAPAN
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE CONTROL ON CERTAIN 301.4C MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE CONTROL ON CERTAIN 301.4C MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ACCUMULATOR COVER, BASE, AND FASTENERS ON CERTAIN H75ES HYDRAULIC HAMMERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ACCUMULATOR COVER, BASE, AND FASTENERS ON CERTAIN H75ES HYDRAULIC HAMMERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR COVER, BASE, AND FASTENERS ON CERTAIN H75ES AND H95ES HYDRAULIC HAMMERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR COVER, BASE, AND FASTENERS ON CERTAIN H75ES AND H95ES HYDRAULIC HAMMERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR SLEEVES ON CERTAIN ASPHALT PAVERS, EXCAVATORS, MOTOR GRADERS, SOIL COMPACTORS, TELEHANDLERS, TRACK-TYPE TRACTORS, WHEELED EXCAVATORS, WHEEL LOADERS, AND WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR SLEEVES ON CERTAIN ASPHALT PAVERS, EXCAVATORS, MOTOR GRADERS, SOIL COMPACTORS, TELEHANDLERS, TRACK-TYPE TRACTORS, WHEELED EXCAVATORS, WHEEL LOADERS, AND WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FINAL DRIVE FULL OPL MOTOR HOUSING TO PARTIAL OPL MOTOR HOUSING ON CERTAIN 336D, 336D2, 336E, 336F, 340D, AND 340D2 EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING FINAL DRIVE FULL OPL MOTOR HOUSING TO PARTIAL OPL MOTOR HOUSING ON CERTAIN 336D, 336D2, 336E, 336F, 340D, AND 340D2 EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER HOSE ON CERTAIN 374F AND 390F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER HOSE ON CERTAIN 374F AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE WIRING HARNESS AND HARNESS SUPPORT BRACKET ON CERTAIN 311F, AND 313F GC EXCAVATORS WITH EXTENDED RUNNING HOURS (JAPAN EXCLUDED) PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE WIRING HARNESS AND HARNESS SUPPORT BRACKET ON CERTAIN 311F, AND 313F GC EXCAVATORS WITH EXTENDED RUNNING HOURS (JAPAN EXCLUDED)
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 487-8468 RETAINING RINGS FROM DEALER PART STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 487-8468 RETAINING RINGS FROM DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL HOSE ON CERTAIN MEDIUM AND LARGE EXCAVATORS, EQUIPPED WITH THE CATERPILLAR REGENERATION SYSTEM PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL HOSE ON CERTAIN MEDIUM AND LARGE EXCAVATORS, EQUIPPED WITH THE CATERPILLAR REGENERATION SYSTEM
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEAD BOLTS ON CERTAIN 3500 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEAD BOLTS ON CERTAIN 3500 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN E AND F SERIES EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 373-8014 OIL PUMPS FROM DEALER PART STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 373-8014 OIL PUMPS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK MODULES ON CERTAIN EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK MODULES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE HARNESS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE HARNESS ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL HOSE ON CERTAIN 324E, 329E, 336E, 349E, 336F, 340F, 352F, 374F, AND 390F EXCAVATORS, EQUIPPED WITH THE CATERPILLAR REGENERATION SYSTEM PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL HOSE ON CERTAIN 324E, 329E, 336E, 349E, 336F, 340F, 352F, 374F, AND 390F EXCAVATORS, EQUIPPED WITH THE CATERPILLAR REGENERATION SYSTEM
PRODUCT SUPPORT PROGRAM FOR REROUTING THE CHASSIS HARNESS ON CERTAIN 301.7D CR MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REROUTING THE CHASSIS HARNESS ON CERTAIN 301.7D CR MINI HYDRAULIC EXCAVATORS