PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN PRODUCT LINK RADIOS FROM DEALER PARTS STOCK
Usage:
TEBE5330-00
Show/hide table
| 13Oct2016 |
U-546
A-394
D-464
O-464
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN PRODUCT LINK RADIOS FROM DEALER PARTS STOCK |
|
| 7606 7610 7750 | PI70643 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jan2017 |
PROBLEM
Show/hide table
| Certain Product Link systems 444-9619 and 480-3539 PL241 radios may contain a problem in the firmware. This may cause these radios to not communicate. |
ACTION REQUIRED
Show/hide table
| Refer to the attached Rework Procedure for dealer parts stock action. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
| Inspect the Serial Number (SN) on all the following parts and field installation kits. P/N: 444-9619 and 480-3539 Kit: 455-5561 and 479-6176 If any 444-9619 or 480-3539 PL241 Radios have SN that matches one of the SN listed below, remove the parts from dealer parts stock. If the radio has a SN other than the SN listed below, return the radio to the original packaging. Mark the package to indicate it has been inspected according to this program. Return the part to dealer stock. 0336J023YB 0336J024YB 0336J025YB 0336J026YB 0336J027YB 0336J028YB 0336J029YB 0336J030YB 0336J031YB 0336J032YB 0336J033YB 0336J034YB 0336J035YB 0336J036YB 0336J037YB 0336J038YB 0336J039YB 0336J041YB 0336J042YB 0336J043YB 0336J047YB 0336J048YB 0336J049YB 0336J051YB 0336J052YB 0336J053YB 0336J054YB 0336J055YB 0336J056YB 0336J057YB 0336J058YB 0336J059YB 0336J060YB 0336J061YB 0336J062YB 0336J063YB 0336J064YB 0336J065YB 0336J066YB 0336J068YB 0336J069YB 0336J070YB 0336J071YB 0336J072YB 0336J073YB 0336J074YB 0336J075YB 0336J076YB 0336J077YB 0336J078YB 0336J079YB 0336J080YB 0336J081YB 0336J082YB 0336J083YB 0336J084YB 0336J085YB 0336J090YB 0336J095YB 0336J099YB 0336J100YB 0336J104YB 0336J105YB 0336J106YB 0346J001YB 0346J002YB 0346J004YB 0346J006YB 0346J008YB 0346J010YB 0346J012YB 0346J013YB 0346J015YB 0346J017YB 0346J019YB 0346J025YB 0346J026YB 0346J028YB 0346J029YB 0346J031YB 0346J035YB 0346J057YB 0786J155YB 0786J156YB 0786J169YB 0786J177YB 0786J195YB 0906J030YB 0906J047YB 0976J044YB 0986J065YB 0986J081YB 0986J087YB 0986J107YB |
 |
| Image1.1.1 |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE WIRING HARNESS SUPPORT BRACKET ON CERTAIN 311F, 312F, AND 313F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE WIRING HARNESS SUPPORT BRACKET ON CERTAIN 311F, 312F, AND 313F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE SWING GEAR ON CERTAIN 301.7D CR MINI HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE SWING GEAR ON CERTAIN 301.7D CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORK OF THE 476-0262 AIR INLET HOSE CLAMPING ON CERTAIN 320F L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORK OF THE 476-0262 AIR INLET HOSE CLAMPING ON CERTAIN 320F L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING NRS COOLER ON CERTAIN 349F, AND 352F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING NRS COOLER ON CERTAIN 349F, AND 352F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING NRS COOLER ON CERTAIN 390F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING NRS COOLER ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL SENDER ON CERTAIN EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL SENDER ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN 336D, AND 336D2 EXCAVATORS OPERATING AT HIGH ALTITUDE PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN 336D, AND 336D2 EXCAVATORS OPERATING AT HIGH ALTITUDE
PRODUCT SUPPORT PROGRAM FOR REPLACING LOOSE AND/OR BROKEN SWING BEARING BOLTS ON CERTAIN 305E2 AND 305.5E2 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING LOOSE AND/OR BROKEN SWING BEARING BOLTS ON CERTAIN 305E2 AND 305.5E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM TO INSPECT AND REPLACE THE MAIN CHASSIS HARNESS ON CERTAIN 319D, 323D, 323E, 329D, 329E, 336D, 336E, 345D, 349E, 374D, AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM TO INSPECT AND REPLACE THE MAIN CHASSIS HARNESS ON CERTAIN 319D, 323D, 323E, 329D, 329E, 336D, 336E, 345D, 349E, 374D, AND 390D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EXHAUST EMISSION LABEL ON CERTAIN 336F, AND 340F EXCAVATORS, 725C ARTICULATED TRUCKS, 966M, AND 972M WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EXHAUST EMISSION LABEL ON CERTAIN 336F, AND 340F EXCAVATORS, 725C ARTICULATED TRUCKS, 966M, AND 972M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT SHUNT TANK ON CERTAIN 336E/F, 349E/F, 352F, 374F, AND 390F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT SHUNT TANK ON CERTAIN 336E/F, 349E/F, 352F, 374F, AND 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 384-2207 SEAT GROUP ON CERTAIN 320D2 EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 384-2207 SEAT GROUP ON CERTAIN 320D2 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LEVER ASSEMBLY CONTROL ON THE REAR PUMP ON CERTAIN 390F EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LEVER ASSEMBLY CONTROL ON THE REAR PUMP ON CERTAIN 390F EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM ON CERTAIN 311F, 312E, 312F, 313F, 314E, 315F, 316E, AND 316F EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM ON CERTAIN 311F, 312E, 312F, 313F, 314E, 315F, 316E, AND 316F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL KIT FROM THE HYDRAULIC SWIVEL GROUP ON CERTAIN M313D, M314F, M315D, M315D2, M316F, M317D2, M318D, M318F, M320D2, M320F, M322D, M322D2, M322F, M324D2, MH3022, AND MH3024 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL KIT FROM THE HYDRAULIC SWIVEL GROUP ON CERTAIN M313D, M314F, M315D, M315D2, M316F, M317D2, M318D, M318F, M320D2, M320F, M322D, M322D2, M322F, M324D2, MH3022, AND MH3024 WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER ROD ON CERTAIN GSH20B ORANGE PEEL GRAPPLES PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER ROD ON CERTAIN GSH20B ORANGE PEEL GRAPPLES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 382-7150 TUBE ASSEMBLY ON CERTAIN 390F EXCAVATORS AND MH3295 MATERIAL HANDLERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 382-7150 TUBE ASSEMBLY ON CERTAIN 390F EXCAVATORS AND MH3295 MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK ASSEMBLY ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK ASSEMBLY ON CERTAIN 308E2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAT PAN ON CERTAIN 312D 2, 313D 2, 318D 2, 320D 2, 323D 2, 324D, 326D 2, 326D, 329D 2, 329D, 330D 2, 336D, 336D 2, 336D, 340D 2, 349D 2, AND 349D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAT PAN ON CERTAIN 312D 2, 313D 2, 318D 2, 320D 2, 323D 2, 324D, 326D 2, 326D, 329D 2, 329D, 330D 2, 336D, 336D 2, 336D, 340D 2, 349D 2, AND 349D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 338-6050 TUBE ASSEMBLY ON CERTAIN 374D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 338-6050 TUBE ASSEMBLY ON CERTAIN 374D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR SLEEVES ON CERTAIN ASPHALT PAVERS, EXCAVATORS, MOTOR GRADERS, SOIL COMPACTORS, TELEHANDLERS, TRACK-TYPE TRACTORS, WHEELED EXCAVATORS, WHEEL LOADERS, AND WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR SLEEVES ON CERTAIN ASPHALT PAVERS, EXCAVATORS, MOTOR GRADERS, SOIL COMPACTORS, TELEHANDLERS, TRACK-TYPE TRACTORS, WHEELED EXCAVATORS, WHEEL LOADERS, AND WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR COVER, BASE, AND FASTENERS ON CERTAIN H75ES AND H95ES HYDRAULIC HAMMERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR COVER, BASE, AND FASTENERS ON CERTAIN H75ES AND H95ES HYDRAULIC HAMMERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ACCUMULATOR COVER, BASE, AND FASTENERS ON CERTAIN H75ES HYDRAULIC HAMMERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ACCUMULATOR COVER, BASE, AND FASTENERS ON CERTAIN H75ES HYDRAULIC HAMMERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE CONTROL ON CERTAIN 301.4C MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BLADE CONTROL ON CERTAIN 301.4C MINI HYDRAULIC EXCAVATORS