Steering Cylinder Ends - Lubricate
Show/hide table
| |
| 插圖 1 | g06134173 |
|
右後支柱 | |
附註為便於檢視，部分組件已取下。
附註為便於潤滑右後支柱轉向汽缸上的兩個油嘴，請將右後支柱移動至內側位置。
Show/hide table
| |
| 插圖 2 | g06283570 |
|
左前支柱 | |
Show/hide table
| |
| 插圖 3 | g06134176 |
|
右前支柱 | |
使用多用途潤滑脂潤滑 6 個油嘴。 前轉向汽缸、前轉向橫拉桿，以及右後支柱轉向汽缸上各有兩個油嘴。
Caterpillar Information System:
PM310, PM312, and PM313 Cold Planer Rotor Drive Clutch Bearings - Lubricate
PM310, PM312, and PM313 Cold Planer Rotor Drive Belt - Inspect
An Alignment Procedure for the Fan Support Group as Part of the Radiator Guard Group Is Now Used on the 836K Landfill Compactor {0635, 1353, 1356, 1360, 1386, 7251} An Alignment Procedure for the Fan Support Group as Part of the Radiator Guard Group Is Now Used on the 836K Landfill Compactor {0635, 1353, 1356, 1360, 1386, 7251}
MD6200 Rotary Drill Cab Air Filter (Fresh Air) - Clean/Replace
725C2 and 730C2 Articulated Truck Machine System Rear Suspension Frame - Remove and Install
An Improved Paint Masking Process Is Now Used on the Front Axle Steering Cylinders for Certain Backhoe Loaders {4303, 4313} An Improved Paint Masking Process Is Now Used on the Front Axle Steering Cylinders for Certain Backhoe Loaders {4303, 4313}
C175–16 Locomotive Engine Air in Fuel - Test
2570D and 2670D Wheel Feller Buncher Engine Supplement Engine - Remove and Install
725C2 and 730C2 Articulated Truck Machine System Center Suspension Frame - Remove and Install
994K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
797F and 797F XQ Off-Highway Trucks Magnetic Plug (Pump Drive, Hydraulic) - Check
New Hose Clamps are Now Used in the Coolant Lines Group of Certain 700 Series Articulated Trucks {1087, 1380} New Hose Clamps are Now Used in the Coolant Lines Group of Certain 700 Series Articulated Trucks {1087, 1380}
PM310, PM312, and PM313 Cold Planer Water Spray System - Inspect
563D and 573D Wheel Feller Buncher Machine Systems Control Manifold (Hydraulic Fan) - Remove and Install
PM310, PM312, and PM313 Cold Planer Water Spray System Fluid Level - Check
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - Second Stage Turbocharger
CP54B, CS54B and CS64B Soil Compactors Machine Systems Operator Controls (Vibratory System)
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Manual Lowering (Powered Stairway) - Test - If Equipped
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Platform (Powered Stairway) - Lubricate - If Equipped
730C2 and 725C2 Articulated Truck Power Train Front Axle - Remove and Install
PM310, PM312, and PM313 Cold Planer Lower Conveyor Deflectors (First Stage) - Inspect/Replace
PM310, PM312, and PM313 Cold Planer Moldboard Cutting Edge - Inspect/Adjust/Replace