Platform (Powered Stairway) - Lubricate - If Equipped
a. Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
- Remove the bolts from the tread plates, and store the bolts for reuse.
- Remove the tread plates, and store the plates for reuse.
Show/hide table
Illustration 1 | g06134389 |
- Clean the grease fittings for the hydraulic cylinder and the pivot shaft, and lubricate the cylinder and the shaft through the fittings.
Show/hide table
Illustration 2 | g06134390 |
- Install the tread plates.
- Install the bolts for the tread plates, and tighten the bolts to the proper torque.
Show/hide table
Illustration 3 | g06134391 |
Caterpillar Information System:
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Manual Lowering (Powered Stairway) - Test - If Equipped
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped
CP54B, CS54B and CS64B Soil Compactors Machine Systems Operator Controls (Vibratory System)
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - Second Stage Turbocharger
PM310, PM312, and PM313 Cold Planer Water Spray System Fluid Level - Check
563D and 573D Wheel Feller Buncher Machine Systems Control Manifold (Hydraulic Fan) - Remove and Install
PM310, PM312, and PM313 Cold Planer Water Spray System - Inspect
New Hose Clamps are Now Used in the Coolant Lines Group of Certain 700 Series Articulated Trucks {1087, 1380} New Hose Clamps are Now Used in the Coolant Lines Group of Certain 700 Series Articulated Trucks {1087, 1380}
PM310, PM312, and PM313 Cold Planer Steering Cylinder Ends - Lubricate
PM310, PM312, and PM313 Cold Planer Rotor Drive Clutch Bearings - Lubricate
PM310, PM312, and PM313 Cold Planer Rotor Drive Belt - Inspect
An Alignment Procedure for the Fan Support Group as Part of the Radiator Guard Group Is Now Used on the 836K Landfill Compactor {0635, 1353, 1356, 1360, 1386, 7251} An Alignment Procedure for the Fan Support Group as Part of the Radiator Guard Group Is Now Used on the 836K Landfill Compactor {0635, 1353, 1356, 1360, 1386, 7251}
730C2 and 725C2 Articulated Truck Power Train Front Axle - Remove and Install
PM310, PM312, and PM313 Cold Planer Lower Conveyor Deflectors (First Stage) - Inspect/Replace
PM310, PM312, and PM313 Cold Planer Moldboard Cutting Edge - Inspect/Adjust/Replace
PM310, PM312, and PM313 Cold Planer Rotor Bearing Oil - Change
PM310, PM312, and PM313 Cold Planer Rotor Bearing Oil Level - Check
Cat Activate Mobile Application User Guide {7606, 7620} Cat Activate Mobile Application User Guide {7606, 7620}
Installing The 523-4907 Work Tool Positioner Kit {5112, 5264, 5479} Installing The 523-4907 Work Tool Positioner Kit {5112, 5264, 5479}
Installing The 523-4908 Work Tool Positioner Kit {5112, 5264, 5479} Installing The 523-4908 Work Tool Positioner Kit {5112, 5264, 5479}
PM310, PM312, and PM313 Cold Planer Water Tank Strainer - Clean and Inspect
PM820, PM822, and PM825 Cold Planer Machine Systems Antislab - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Remove
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Ether Starting Aid Cylinder - Replace