An Improved Paint Masking Process Is Now Used on the Front Axle Steering Cylinders for Certain Backhoe Loaders {4303, 4313}
- Backhoe Loader
- 415F2 (S/N: HWA1-50177)
- 415F2 IL (S/N: PF41-308)
- 416F2 (S/N: LYA1-260; HWB1-796)
- 420F2 IT (S/N: LYC1-289; HWD1-1002)
- 420F2 ST (S/N: LYB1-521; HWC1-1294)
- 422F2 (S/N: LYF1-625)
- 427F2 (S/N: HWK1-240)
- 428F2 (S/N: LYG1-1000; HWN1-426)
- 430F2 IT (S/N: LYE1-186; HWG1-334)
- 430F2 ST (S/N: LYD1-183; HWE1-425)
- 415F2 IL (S/N: PF41-308)
Description Of Change: A process improvement has been made on the paint line when the top coat of paint is applied to the front axles. Quality checks have been added to ensure that there is no top coat paint on the chrome of the steering cylinders. The improved masking process prevents the paint from inadvertently covering the chrome and will prevent leaks from occurring.
Adaptable To: The improvement to the 214-5097 Steering Cylinder Gp is effective with all machines after the listed serial numbers
Caterpillar Information System:
C175–16 Locomotive Engine Air in Fuel - Test
2570D and 2670D Wheel Feller Buncher Engine Supplement Engine - Remove and Install
725C2 and 730C2 Articulated Truck Machine System Center Suspension Frame - Remove and Install
994K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
797F and 797F XQ Off-Highway Trucks Magnetic Plug (Pump Drive, Hydraulic) - Check
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B} M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Editing Truck and Material Lists
785G Off-Highway Truck Systems Electronic Control Module (ECM) - Replace
PM310, PM312, and PM313 Cold Planer Legs (Struts) - Lubricate
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil Sample - Obtain
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil Level - Check
725C2 and 730C2 Articulated Truck Machine System Rear Suspension Frame - Remove and Install
MD6200 Rotary Drill Cab Air Filter (Fresh Air) - Clean/Replace
An Alignment Procedure for the Fan Support Group as Part of the Radiator Guard Group Is Now Used on the 836K Landfill Compactor {0635, 1353, 1356, 1360, 1386, 7251} An Alignment Procedure for the Fan Support Group as Part of the Radiator Guard Group Is Now Used on the 836K Landfill Compactor {0635, 1353, 1356, 1360, 1386, 7251}
PM310, PM312, and PM313 Cold Planer Rotor Drive Belt - Inspect
PM310, PM312, and PM313 Cold Planer Rotor Drive Clutch Bearings - Lubricate
PM310, PM312, and PM313 Cold Planer Steering Cylinder Ends - Lubricate
New Hose Clamps are Now Used in the Coolant Lines Group of Certain 700 Series Articulated Trucks {1087, 1380} New Hose Clamps are Now Used in the Coolant Lines Group of Certain 700 Series Articulated Trucks {1087, 1380}
PM310, PM312, and PM313 Cold Planer Water Spray System - Inspect
563D and 573D Wheel Feller Buncher Machine Systems Control Manifold (Hydraulic Fan) - Remove and Install
PM310, PM312, and PM313 Cold Planer Water Spray System Fluid Level - Check
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - Second Stage Turbocharger
CP54B, CS54B and CS64B Soil Compactors Machine Systems Operator Controls (Vibratory System)