Hydraulic System Oil Sample - Obtain
取樣閥位於液壓機油濾清器的底座。 請參閱特別出版品, SEBU6250, "S·O·S 機油分析"，以了解與取得液壓機油油樣有關的資訊。 請參閱特別出版品, PEHP6001, "如何取得好的油樣"，以了解更多與取得液壓機油油樣有關的資訊。
- 打開右側檢修門。
Show/hide table
插圖 1 g06133615 - 從液壓機油取樣閥處採集液壓機油油樣。
- 關閉右側檢修門。
Caterpillar Information System:
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil Level - Check
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil Filter - Replace
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil - Change
PM310, PM312, and PM313 Cold Planer Fuel Tank Water and Sediment - Drain
2570D and 2670D Wheel Feller Buncher Engine Supplement Engine Oil Cooler - Remove and Install
PM310, PM312, and PM313 Cold Planer Engine Oil and Filter - Change
PM310, PM312, and PM313 Cold Planer Engine Oil Sample - Obtain
PM310, PM312, and PM313 Cold Planer Engine Oil Level - Check
PM310, PM312, and PM313 Cold Planer Engine Mounts - Inspect
PM310, PM312, and PM313 Cold Planer Engine Air Filter Primary Element - Clean/Replace
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid Filter - Replace
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Simple Calibration
PM310, PM312, and PM313 Cold Planer Legs (Struts) - Lubricate
785G Off-Highway Truck Systems Electronic Control Module (ECM) - Replace
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Editing Truck and Material Lists
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B} M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
797F and 797F XQ Off-Highway Trucks Magnetic Plug (Pump Drive, Hydraulic) - Check
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
994K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
725C2 and 730C2 Articulated Truck Machine System Center Suspension Frame - Remove and Install
2570D and 2670D Wheel Feller Buncher Engine Supplement Engine - Remove and Install
C175–16 Locomotive Engine Air in Fuel - Test
An Improved Paint Masking Process Is Now Used on the Front Axle Steering Cylinders for Certain Backhoe Loaders {4303, 4313} An Improved Paint Masking Process Is Now Used on the Front Axle Steering Cylinders for Certain Backhoe Loaders {4303, 4313}
725C2 and 730C2 Articulated Truck Machine System Rear Suspension Frame - Remove and Install