Engine Mounts - Inspect
Show/hide table
插圖 1 | g06133509 |
打開引擎室。
共有四個引擎安裝件。 引擎兩側各有兩個引擎安裝件。
引擎安裝不妥時,就會發生引擎振動。 鬆動引擎安裝件或是耗損的引擎安裝件,都會造成引擎振動。
檢查引擎安裝件是否有耗損問題。
更換任何耗損的引擎安裝件。
檢查引擎安裝件是否有正確的螺栓扭矩。
如果安裝件鬆動,請鎖緊安裝件。
關上引擎室。
Caterpillar Information System:
PM310, PM312, and PM313 Cold Planer Engine Air Filter Primary Element - Clean/Replace
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid Filter - Replace
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Simple Calibration
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid - Fill
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Sample (Level 2) - Obtain
PM310, PM312, and PM313 Cold Planer Coolant Sample (Level 1) - Obtain
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Level - Check
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Extender (ELC) - Add
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Powered Stairway - Check
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Hoist Screens - Clean
440 and 450 Backhoe Loader Hydraulic Coupling Quick Disconnect - Clean/Inspect
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Locks - Lubricate
PM310, PM312, and PM313 Cold Planer Engine Oil Level - Check
PM310, PM312, and PM313 Cold Planer Engine Oil Sample - Obtain
PM310, PM312, and PM313 Cold Planer Engine Oil and Filter - Change
2570D and 2670D Wheel Feller Buncher Engine Supplement Engine Oil Cooler - Remove and Install
PM310, PM312, and PM313 Cold Planer Fuel Tank Water and Sediment - Drain
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil - Change
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil Filter - Replace
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil Level - Check
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil Sample - Obtain
PM310, PM312, and PM313 Cold Planer Legs (Struts) - Lubricate
785G Off-Highway Truck Systems Electronic Control Module (ECM) - Replace
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Editing Truck and Material Lists