Powered Stairway - Check
a. Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
- Check the powered stairway for the following conditions:
- Ensure that the handrails are straight and do not have signs of interference or any other damage.
- Check that the stairway assembly does not have signs of interference or any other damage.
- Check that no unusual noise occurs when the stairway is being raised or lowered.
If there are any issues with the stairway or handrails, contact your Cat dealer for repair information.
Show/hide table
| |
| Illustration 1 | g06133454 |
Caterpillar Information System:
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Hoist Screens - Clean
440 and 450 Backhoe Loader Hydraulic Coupling Quick Disconnect - Clean/Inspect
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Locks - Lubricate
730C2 and 725C2 Articulated Truck Power Train Center Axle - Remove and Install
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Cooling System Coolant (ELC) - Change
Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, 795F, and 797F Large Off-Highway Trucks {1408, 1417, 1422, 4493} Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, 795F, and 797F Large Off-Highway Trucks {1408, 1417, 1422, 4493}
C175-16 and C175-20 Engines for Off-Highway Truck/Tractors Exhaust Has Excessive White Smoke
2570D and 2670D Wheel Feller Buncher Engine Supplement Aftercooler - Remove and Install
2570D and 2670D Wheel Feller Buncher Engine Supplement Hydraulic Oil Cooler - Remove and Install
2570D and 2670D Wheel Feller Buncher Engine Supplement Radiator - Remove and Install
CCS7 Combination Vibratory Compactor Machine Systems Electrical Schematic (Emulsion Spray System)
CCS7 Combination Vibratory Compactor Machine Systems Location of Components (Emulsion Spray System)
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Extender (ELC) - Add
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Level - Check
PM310, PM312, and PM313 Cold Planer Coolant Sample (Level 1) - Obtain
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Sample (Level 2) - Obtain
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid - Fill
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Simple Calibration
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid Filter - Replace
PM310, PM312, and PM313 Cold Planer Engine Air Filter Primary Element - Clean/Replace
PM310, PM312, and PM313 Cold Planer Engine Mounts - Inspect
PM310, PM312, and PM313 Cold Planer Engine Oil Level - Check
PM310, PM312, and PM313 Cold Planer Engine Oil Sample - Obtain
PM310, PM312, and PM313 Cold Planer Engine Oil and Filter - Change