Cooling System Coolant Sample (Level 2) - Obtain
Show/hide table
| 注意事項 |
|---|
|
隨時以指定的提示符號抽樣油料，並利用個別的指定提示符號抽樣冷卻液。 在兩種類型的樣本中採用相同的泵可能會影響已排除的樣本。 此污染會導致代理商和用戶進行錯誤的分析和不正確的解釋 |
Show/hide table
| |
| 插圖 1 | g06134553 |
冷卻液取樣口位於冷卻液泵附近。 打開駕駛員平台上的引擎檢修門，即可看見該開口。
盡可能在接近建議的取樣週期時提取冷卻液樣本。 您可以向 Caterpillar 代理商索取收集樣本的用品。
請參閱操作保養手冊, "冷卻系統冷卻液樣本（1 級） - 取樣"以瞭解正確進行冷卻液取樣的指引。
提交樣本用於 2 級分析。
有關冷卻液分析的其他資訊，請參閱專門出版物, SEBU6250, "卡特彼勒機器推薦用液"或諮詢您的 Caterpillar 代理商。
Caterpillar Information System:
PM310, PM312, and PM313 Cold Planer Coolant Sample (Level 1) - Obtain
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Level - Check
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Extender (ELC) - Add
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Powered Stairway - Check
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Hoist Screens - Clean
440 and 450 Backhoe Loader Hydraulic Coupling Quick Disconnect - Clean/Inspect
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Locks - Lubricate
730C2 and 725C2 Articulated Truck Power Train Center Axle - Remove and Install
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Cooling System Coolant (ELC) - Change
Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, 795F, and 797F Large Off-Highway Trucks {1408, 1417, 1422, 4493} Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, 795F, and 797F Large Off-Highway Trucks {1408, 1417, 1422, 4493}
C175-16 and C175-20 Engines for Off-Highway Truck/Tractors Exhaust Has Excessive White Smoke
2570D and 2670D Wheel Feller Buncher Engine Supplement Aftercooler - Remove and Install
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid - Fill
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Simple Calibration
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid Filter - Replace
PM310, PM312, and PM313 Cold Planer Engine Air Filter Primary Element - Clean/Replace
PM310, PM312, and PM313 Cold Planer Engine Mounts - Inspect
PM310, PM312, and PM313 Cold Planer Engine Oil Level - Check
PM310, PM312, and PM313 Cold Planer Engine Oil Sample - Obtain
PM310, PM312, and PM313 Cold Planer Engine Oil and Filter - Change
2570D and 2670D Wheel Feller Buncher Engine Supplement Engine Oil Cooler - Remove and Install
PM310, PM312, and PM313 Cold Planer Fuel Tank Water and Sediment - Drain
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil - Change
PM310, PM312, and PM313 Cold Planer Hydraulic System Oil Filter - Replace