Cooling System Coolant Level - Check
Show/hide table
 |
|
在引擎工作溫度下，引擎冷卻液是熱的且具有壓力。 蒸氣會造成人員受傷。 只在引擎停機後，且加注口蓋已降溫到可徒手拆下後，才能檢查冷卻液液面。 慢慢地拆下加注蓋以釋放壓力。 冷卻系統內的防鏽劑中含有鹼性物質。 避免與皮膚及眼睛接觸，以免受傷。 |
- 慢慢地鬆開分流油箱上的加注口蓋以釋放系統中的壓力。 慢慢地取下分路油箱上的加注口蓋。
Show/hide table
插圖 2 g03706676 - 將冷卻液液位維持在標示線之間。 如果必須每天加注冷卻液，請檢查冷卻系統是否有洩漏。 發現洩漏時請進行維修。
- 檢查墊圈。 檢查分路油箱上的加注口蓋。 使用乾淨的布清潔分路油箱上的加注口蓋。 如果墊圈或蓋子有損壞，請更換蓋子。
- 將加注口蓋安裝到分路油箱上。
Show/hide table
| |
| 插圖 1 | g06133456 |
Caterpillar Information System:
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Extender (ELC) - Add
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Powered Stairway - Check
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Hoist Screens - Clean
440 and 450 Backhoe Loader Hydraulic Coupling Quick Disconnect - Clean/Inspect
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Locks - Lubricate
730C2 and 725C2 Articulated Truck Power Train Center Axle - Remove and Install
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Cooling System Coolant (ELC) - Change
Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, 795F, and 797F Large Off-Highway Trucks {1408, 1417, 1422, 4493} Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, 795F, and 797F Large Off-Highway Trucks {1408, 1417, 1422, 4493}
C175-16 and C175-20 Engines for Off-Highway Truck/Tractors Exhaust Has Excessive White Smoke
2570D and 2670D Wheel Feller Buncher Engine Supplement Aftercooler - Remove and Install
2570D and 2670D Wheel Feller Buncher Engine Supplement Hydraulic Oil Cooler - Remove and Install
2570D and 2670D Wheel Feller Buncher Engine Supplement Radiator - Remove and Install
PM310, PM312, and PM313 Cold Planer Coolant Sample (Level 1) - Obtain
PM310, PM312, and PM313 Cold Planer Cooling System Coolant Sample (Level 2) - Obtain
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid - Fill
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Simple Calibration
PM310, PM312, and PM313 Cold Planer Diesel Exhaust Fluid Filter - Replace
PM310, PM312, and PM313 Cold Planer Engine Air Filter Primary Element - Clean/Replace
PM310, PM312, and PM313 Cold Planer Engine Mounts - Inspect
PM310, PM312, and PM313 Cold Planer Engine Oil Level - Check
PM310, PM312, and PM313 Cold Planer Engine Oil Sample - Obtain
PM310, PM312, and PM313 Cold Planer Engine Oil and Filter - Change
2570D and 2670D Wheel Feller Buncher Engine Supplement Engine Oil Cooler - Remove and Install
PM310, PM312, and PM313 Cold Planer Fuel Tank Water and Sediment - Drain