The Enclosure Latch Assembly Has Been Improved on Certain 24M Motor Graders {7263}
- Motor Grader:
- 24M (S/N: B9K1-UP)
Description of Change: A new washer is now used on the enclosure latch assembly on the machines listed above. The new washer increases the hardware retention capacity and improves the service life of the latch assembly.
Adaptable To: The improved 294-2382 Latch As is effective in production with the following machines:
- 24M (B9K653-UP)
- 24M (B9K1-652)
Note: Machines B9K304-652 may already be equipped with a 326-0612 Tab Washer. If already equipped, verify that the washer tabs have been folded over.
Instructions
If your machine does not have the 326-0612 Tab Washers, add the 326-0612 Tab Washers. Ensure that each tab is folded over to improve the retention of hardware (1).
Show/hide table
 | |
| Illustration 1 | g03355060 |
Caterpillar Information System:
2013/04/25 Improved Coolant Gasket Used on Certain 3500 Engines {1353, 1380, 7555}
730C2 Articulated Truck Stopping the Engine
Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers{7324} Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers{7324}
2013/02/22 An Improved Oil Line Support Bracket Is Now Available On Certain Off-Highway Trucks, Wheel Loaders, and Wheel Dozers. {1307}
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Undercarriage - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Electrical Connector - Inspect
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Configuration Menu
986H Wheel Loader Machine Systems General Information (Brake, Hydraulic Fan System)
MH3049 Material Handler Machine Systems Cab Riser Cylinder - Remove and Install - Forward/Back Cylinders
2570C and 2670C Wheel Feller Bunchers Parking Brake Manual Release
2013/03/01 Improved Bolts Now Used on Bunching Finger and Grapple Arm Cylinder Glands on Felling Heads {5362, 5555, 6307}
14M Series 3 Motor Grader Maintenance Interval Schedule
2013/03/01 New TOPCON Grade Controller Software Is Now Available For Certain Asphalt Pavers {7219, 7220, 7620}
2013/03/22 A New Universal Joint is Now Used on Certain Large Off-Highway Trucks {3108, 3251}
R1300G Load Haul Dump 3306 Engine Supplement Governor Actuator - Remove and Install
24M Motor Grader Hydraulic and Steering System Introduction
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Temperature Sensor (DPF) - Remove and Install
2013/03/04 Improved Installation of the Multifunctional Lever Harness As on Certain Off-Highway Trucks and Wheel Tractor-Scrapers {1408, 5737}
24M Motor Grader Hydraulic and Steering System Location of Components
2570C and 2670C Wheel Feller Bunchers Capacities (Refill)
24M Motor Grader Hydraulic and Steering System Control Manifold (Implement, Steering)
725C2 Articulated Truck Additional Messages
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Ignition Coil - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Exhaust Lines - Remove and Install