966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Caterpillar


Ignition Coil - Remove and Install

Usage:

972M A8P

Removal Procedure

Start By:

  1. Connect the steering frame lock.


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g03330059

  1. Raise hood (1) by activating switch (2). Turn battery disconnect switch (3) to the OFF position.


    Illustration 2g03348327

  2. Remove clips (4), bolt (6), and hose (5).


    Illustration 3g03348368

  3. Remove bolts (8). Remove four bolts (9) (two not shown). Remove upper shroud (7).


    Illustration 4g03350753

  4. Disconnect harness assemblies (10). Remove bolts (12) in order to remove ignition coil (11).

Installation Procedure

  1. Install ignition coil (11) in the reverse order of removal.

Caterpillar Information System:

725C2 Articulated Truck Additional Messages
24M Motor Grader Hydraulic and Steering System Control Manifold (Implement, Steering)
2570C and 2670C Wheel Feller Bunchers Capacities (Refill)
24M Motor Grader Hydraulic and Steering System Location of Components
2013/03/04 Improved Installation of the Multifunctional Lever Harness As on Certain Off-Highway Trucks and Wheel Tractor-Scrapers {1408, 5737}
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Temperature Sensor (DPF) - Remove and Install
24M Motor Grader Hydraulic and Steering System Introduction
R1300G Load Haul Dump 3306 Engine Supplement Governor Actuator - Remove and Install
2013/03/22 A New Universal Joint is Now Used on Certain Large Off-Highway Trucks {3108, 3251}
2013/03/01 New TOPCON Grade Controller Software Is Now Available For Certain Asphalt Pavers {7219, 7220, 7620}
2013/03/08 The Enclosure Latch Assembly Has Been Improved on Certain 24M Motor Graders {7263}
2013/04/25 Improved Coolant Gasket Used on Certain 3500 Engines {1353, 1380, 7555}
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Exhaust Lines - Remove and Install
Procedure to Install the Alarm Group on Certain Off-Highway Trucks {1408, 7301} Procedure to Install the Alarm Group on Certain Off-Highway Trucks {1408, 7301}
986H Wheel Loader Machine Systems Transmission Oil Pump
2570C and 2670C Wheel Feller Bunchers Windows - Clean
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Track Drive - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Chain (Drive) - Remove and Install
986H Wheel Loader Machine Systems Piston Pump (Brake, Hydraulic Fan)
986H Wheel Loader Machine Systems Piston Pump (Steering)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Connector Locations
2013/07/22 New Bolts and Washers Are Used for Oil Scavenge Pumps In 3500 Machine Engines {1312, 7553}
AP1000F Asphalt Paver Engine Starting
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Nozzle Heater Harness - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.