Exhaust Lines - Remove and Install
Show/hide table
| |
| Illustration 1 | g03330768 |
Show/hide table
| Specification for 399-0110 Exhaust Lines (DPF Inlet) | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 399-0115 Bellows As | Align the bellow assembly to an angle of 180 ± 3 degrees. |
| 2 | 2 | 346-0335 Band Clamp | Torque to |
Start By:
- Remove the catalyst (SRC).
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove ball clamp (1). Discard ball clamp (1).
Show/hide table
Illustration 3 g03350785 - Remove SCR exhaust line (2).
Show/hide table
Illustration 4 g03350791 - Remove heat shield (3) from SCR exhaust line (2).
Show/hide table
| |
| Illustration 2 | g03350767 |
- Install SCR exhaust line (2) in the reverse order of removal.
- Install a new ball clamp (1). Tighten the new ball clamp (1) to a torque of
35 ± 2 N·m (26 ± 1 lb ft) with a maximum wrench speed of 75 RPM.
- Install a new ball clamp (1). Tighten the new ball clamp (1) to a torque of
Caterpillar Information System:
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Ignition Coil - Remove and Install
725C2 Articulated Truck Additional Messages
24M Motor Grader Hydraulic and Steering System Control Manifold (Implement, Steering)
2570C and 2670C Wheel Feller Bunchers Capacities (Refill)
24M Motor Grader Hydraulic and Steering System Location of Components
2013/03/04 Improved Installation of the Multifunctional Lever Harness As on Certain Off-Highway Trucks and Wheel Tractor-Scrapers {1408, 5737}
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Temperature Sensor (DPF) - Remove and Install
24M Motor Grader Hydraulic and Steering System Introduction
R1300G Load Haul Dump 3306 Engine Supplement Governor Actuator - Remove and Install
2013/03/22 A New Universal Joint is Now Used on Certain Large Off-Highway Trucks {3108, 3251}
2013/03/01 New TOPCON Grade Controller Software Is Now Available For Certain Asphalt Pavers {7219, 7220, 7620}
2013/03/08 The Enclosure Latch Assembly Has Been Improved on Certain 24M Motor Graders {7263}
Procedure to Install the Alarm Group on Certain Off-Highway Trucks {1408, 7301} Procedure to Install the Alarm Group on Certain Off-Highway Trucks {1408, 7301}
986H Wheel Loader Machine Systems Transmission Oil Pump
2570C and 2670C Wheel Feller Bunchers Windows - Clean
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Track Drive - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Chain (Drive) - Remove and Install
986H Wheel Loader Machine Systems Piston Pump (Brake, Hydraulic Fan)
986H Wheel Loader Machine Systems Piston Pump (Steering)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Connector Locations
2013/07/22 New Bolts and Washers Are Used for Oil Scavenge Pumps In 3500 Machine Engines {1312, 7553}
AP1000F Asphalt Paver Engine Starting
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Nozzle Heater Harness - Remove and Install
C4.4 Industrial Engine Engine Valve Lash - Check