2570C and 2670C Wheel Feller Bunchers Caterpillar


Capacities (Refill)

Usage:

2670C B3E

Table 1
Approximate Refill Capacities 
Component or System  Liters  US gal 
Engine Crankcase(1)  17  4.5 
Hydraulic System(2)  227  60 
Cooling System  45  11.8 
Fuel Tank(3)  318  84 
Fuel Tank(4)  322  85 
Front Differential  52  13.8 
Rear Differential  52  13.8 
Parking Brake Reservoir  0.6  0.16 
Transmission  1.6 
Pump Drive  .6 
Pressurized Water System  26  6.9 
(1) This quantity includes changing the oil filter.
(2) This quantity includes the hydraulic tank, the hydraulic lines, and all hydraulic components.
(3) 2570C
(4) 2670C

Table 2
Approximate Refill Capacities 
Compartment or System  kg  lb  Recommended Type 
Air Conditioner  1.0  2.3  R134a 

Table 3
Caterpillar Extender for ELC 
Cooling System Capacity  Recommended Amount of Extender 
50 to 64 L (13 to 17 US gal)  1.18 L (40 fl oz) 

Caterpillar Information System:

24M Motor Grader Hydraulic and Steering System Location of Components
2013/03/04 Improved Installation of the Multifunctional Lever Harness As on Certain Off-Highway Trucks and Wheel Tractor-Scrapers {1408, 5737}
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Temperature Sensor (DPF) - Remove and Install
24M Motor Grader Hydraulic and Steering System Introduction
R1300G Load Haul Dump 3306 Engine Supplement Governor Actuator - Remove and Install
2013/03/22 A New Universal Joint is Now Used on Certain Large Off-Highway Trucks {3108, 3251}
2013/03/01 New TOPCON Grade Controller Software Is Now Available For Certain Asphalt Pavers {7219, 7220, 7620}
2013/03/08 The Enclosure Latch Assembly Has Been Improved on Certain 24M Motor Graders {7263}
2013/04/25 Improved Coolant Gasket Used on Certain 3500 Engines {1353, 1380, 7555}
730C2 Articulated Truck Stopping the Engine
Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers{7324} Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers{7324}
2013/02/22 An Improved Oil Line Support Bracket Is Now Available On Certain Off-Highway Trucks, Wheel Loaders, and Wheel Dozers. {1307}
24M Motor Grader Hydraulic and Steering System Control Manifold (Implement, Steering)
725C2 Articulated Truck Additional Messages
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Ignition Coil - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Exhaust Lines - Remove and Install
Procedure to Install the Alarm Group on Certain Off-Highway Trucks {1408, 7301} Procedure to Install the Alarm Group on Certain Off-Highway Trucks {1408, 7301}
986H Wheel Loader Machine Systems Transmission Oil Pump
2570C and 2670C Wheel Feller Bunchers Windows - Clean
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Track Drive - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Chain (Drive) - Remove and Install
986H Wheel Loader Machine Systems Piston Pump (Brake, Hydraulic Fan)
986H Wheel Loader Machine Systems Piston Pump (Steering)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Connector Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.