Improved Coolant Gasket Used on Certain 3500 Engines {1353, 1380, 7555}
- Off-Highway Truck:
- 785C (S/N: APX1-UP)
- Track-Type Tractor:
- D11R (S/N: 7PZ1-UP)
- Wheel Loader:
- 992G (S/N: AZX1-UP)
- 789C (S/N: 2BW1-UP)
- 793C (S/N: ATY1-UP)
- 793D (S/N: FDB1-UP)
- 994F (S/N: 4421-UP)
Description of Change: The gasket has an improved surface bead on both sides that improves the sealing capability.
Adaptable To:
Show/hide table
Illustration 1 | g03350548 |
(1) 7E-6016 Gasket |
The 7E-6016 Gasket part number is not changed. The effective serial numbers are listed in Table 1.
Show/hide table
Effective Serial Numbers     | |
---|---|
785C     | S/N:APX75002-UP     |
789C     | S/N:2BW83002-UP     |
793C     | S/N:ATY01125-UP     |
793D     | S/N:FDB01792-UP     |
992G     | S/N:AZX75006-UP     |
994F     | S/N:44200341-UP     |
D11R     | S/N:7PZ77002-UP     |
Caterpillar Information System:
730C2 Articulated Truck Stopping the Engine
Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers{7324} Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers{7324}
2013/02/22 An Improved Oil Line Support Bracket Is Now Available On Certain Off-Highway Trucks, Wheel Loaders, and Wheel Dozers. {1307}
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Undercarriage - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Electrical Connector - Inspect
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Configuration Menu
986H Wheel Loader Machine Systems General Information (Brake, Hydraulic Fan System)
MH3049 Material Handler Machine Systems Cab Riser Cylinder - Remove and Install - Forward/Back Cylinders
2570C and 2670C Wheel Feller Bunchers Parking Brake Manual Release
2013/03/01 Improved Bolts Now Used on Bunching Finger and Grapple Arm Cylinder Glands on Felling Heads {5362, 5555, 6307}
14M Series 3 Motor Grader Maintenance Interval Schedule
2013/03/18 Improved 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers {7324}
2013/03/08 The Enclosure Latch Assembly Has Been Improved on Certain 24M Motor Graders {7263}
2013/03/01 New TOPCON Grade Controller Software Is Now Available For Certain Asphalt Pavers {7219, 7220, 7620}
2013/03/22 A New Universal Joint is Now Used on Certain Large Off-Highway Trucks {3108, 3251}
R1300G Load Haul Dump 3306 Engine Supplement Governor Actuator - Remove and Install
24M Motor Grader Hydraulic and Steering System Introduction
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Temperature Sensor (DPF) - Remove and Install
2013/03/04 Improved Installation of the Multifunctional Lever Harness As on Certain Off-Highway Trucks and Wheel Tractor-Scrapers {1408, 5737}
24M Motor Grader Hydraulic and Steering System Location of Components
2570C and 2670C Wheel Feller Bunchers Capacities (Refill)
24M Motor Grader Hydraulic and Steering System Control Manifold (Implement, Steering)
725C2 Articulated Truck Additional Messages
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Ignition Coil - Remove and Install