Improved 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers {7324}
- Wheel Feller Buncher:
- 2470C (S/N: W2M1-UP)
- 2570C (S/N: F1B1-UP)
- 2670C (S/N: B3E1-UP)
- 553C (S/N: PGR1-UP)
- 563C (S/N: JCB1-UP)
- 573C (S/N: RJT1-UP)
ReferenceSpecial Instruction, REHS8025, "Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers"
Description of Change: Improved pivot shaft for the armrest is now used on Wheel Feller Bunchers.
Adaptable To: The new 431-5438 Shaft Kit is adaptable to all machines listed above.
The new 431-5438 Shaft Kit is effective in production on the following machines:
- 2470C (S/N: W2M308-UP)
- 2570C (S/N: F1B213-UP)
- 2670C (S/N: B3E167-UP)
- 553C (S/N: PGR274-UP)
- 563C (S/N: JCB307-UP)
- 573C (S/N: RJT290-UP)
Caterpillar Information System:
C1.5 and C2.2 Engines for Caterpillar Built Machines Air in Fuel - Test
2013/03/04 New Governor Actuator Adjustment Procedure Now Used on R1300G Load Haul Dump Machines {1265, 1716}
Installation and Configuration of Cat® Terrain v5.0 On-board Software{7605} Installation and Configuration of Cat® Terrain v5.0 On-board Software{7605}
Installation of 359-3176 Pivot Bearing and the 433-6434 Plate Assembly on Certain Vibratory Asphalt Compactors{7253} Installation of 359-3176 Pivot Bearing and the 433-6434 Plate Assembly on Certain Vibratory Asphalt Compactors{7253}
2013/03/08 New Power Train Software Is Now Available For Certain 793F and 797F Off-Highway Trucks {7620}
2013/03/01 New Firmware Update Is Now Available for Low Precision Satellite Receiver Gp (GPS) Used on Certain Machine Control and Guidance Products {7010, 7605}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408} Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
MH3049 Material Handler Hydraulic System Swing Pump
Voiding of The Lift Cylinders On Single Tilt F Series Backhoe Loaders{5051, 5102} Voiding of The Lift Cylinders On Single Tilt F Series Backhoe Loaders{5051, 5102}
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Window Wiper Motor - Remove and Install
C27 and C32 Tier 4 Final Marine Engines Vibration Damper and Pulley
2013/03/26 A New Plate Assembly Is Now Used on Certain Vibratory Asphalt Compactors {7253}
14M Series 3 Motor Grader Maintenance Interval Schedule
2013/03/01 Improved Bolts Now Used on Bunching Finger and Grapple Arm Cylinder Glands on Felling Heads {5362, 5555, 6307}
2570C and 2670C Wheel Feller Bunchers Parking Brake Manual Release
MH3049 Material Handler Machine Systems Cab Riser Cylinder - Remove and Install - Forward/Back Cylinders
986H Wheel Loader Machine Systems General Information (Brake, Hydraulic Fan System)
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Configuration Menu
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Electrical Connector - Inspect
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Undercarriage - Remove and Install
2013/02/22 An Improved Oil Line Support Bracket Is Now Available On Certain Off-Highway Trucks, Wheel Loaders, and Wheel Dozers. {1307}
Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers{7324} Installation of the 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers{7324}
730C2 Articulated Truck Stopping the Engine
2013/04/25 Improved Coolant Gasket Used on Certain 3500 Engines {1353, 1380, 7555}