New Power Train Software Is Now Available For Certain 793F and 797F Off-Highway Trucks {7620}
- Off-Highway Truck/Tractor:
- 793F (S/N: SND1-UP; SSP1-UP)
- 797F (S/N: LAJ1-UP; WSP1-UP)
A new 437-3650 Power Train Software Gp is now available for the machines that are listed above. The new software contains the following enhancements:
- Support for single VIMS ECM installation.
- Improvements for Transmission Oil Level Monitoring.
- Support of Lockup Clutch Diagnostic (793 only).
The new 437-3650 Power Train Software Gp is a direct replacement for the former 432-1276 Power Train Software Gp .
Note: The latest Chassis Software available on SIS Web must be installed on the machine prior to installing the 437-3650 Power Train Software Gp .
Note: The new software is available in the form of a flash file through Caterpillar Service Information System (SIS). Go to SIS Web to make sure that the new flash file part number is still the latest flash file part number. A newer flash file part number may be available. SIS Web only displays the latest available flash file.
Caterpillar Information System:
2013/03/01 New Firmware Update Is Now Available for Low Precision Satellite Receiver Gp (GPS) Used on Certain Machine Control and Guidance Products {7010, 7605}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408} Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
MH3049 Material Handler Hydraulic System Swing Pump
Voiding of The Lift Cylinders On Single Tilt F Series Backhoe Loaders{5051, 5102} Voiding of The Lift Cylinders On Single Tilt F Series Backhoe Loaders{5051, 5102}
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Window Wiper Motor - Remove and Install
C27 and C32 Tier 4 Final Marine Engines Vibration Damper and Pulley
2013/03/26 A New Plate Assembly Is Now Used on Certain Vibratory Asphalt Compactors {7253}
Load Haul Dump Machines Vital Information Management System (VIMS)TM System Schematic
Load Haul Dump Machines Vital Information Management System (VIMS)TM Power Supply Circuit of Electronic Control Module
Load Haul Dump Machines Vital Information Management System (VIMS)TM MID 161 - CID 1089 - FMI 14
Load Haul Dump Machines Vital Information Management System (VIMS)TM MID 161 - CID 0890 - FMI 09
Load Haul Dump Machines Vital Information Management System (VIMS)TM MID 161 - CID 0800 - FMI 11
Installation of 359-3176 Pivot Bearing and the 433-6434 Plate Assembly on Certain Vibratory Asphalt Compactors{7253} Installation of 359-3176 Pivot Bearing and the 433-6434 Plate Assembly on Certain Vibratory Asphalt Compactors{7253}
Installation and Configuration of Cat® Terrain v5.0 On-board Software{7605} Installation and Configuration of Cat® Terrain v5.0 On-board Software{7605}
2013/03/04 New Governor Actuator Adjustment Procedure Now Used on R1300G Load Haul Dump Machines {1265, 1716}
C1.5 and C2.2 Engines for Caterpillar Built Machines Air in Fuel - Test
2013/03/18 Improved 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers {7324}
14M Series 3 Motor Grader Maintenance Interval Schedule
2013/03/01 Improved Bolts Now Used on Bunching Finger and Grapple Arm Cylinder Glands on Felling Heads {5362, 5555, 6307}
2570C and 2670C Wheel Feller Bunchers Parking Brake Manual Release
MH3049 Material Handler Machine Systems Cab Riser Cylinder - Remove and Install - Forward/Back Cylinders
986H Wheel Loader Machine Systems General Information (Brake, Hydraulic Fan System)
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Configuration Menu
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Electrical Connector - Inspect