New Firmware Update Is Now Available for Low Precision Satellite Receiver Gp (GPS) Used on Certain Machine Control and Guidance Products {7010, 7605}
- Machine Control and Guidance Products:
- MINESTAR HEALTH (S/N: DNF1-UP)
- Off-Highway Truck/Tractor:
- 793FSeries AC (S/N: EMD1-UP)
- MINESTAR ONBRD (S/N: DNG1-UP; ANM1-UP)
- 793F (S/N: SND1-UP; SSP1-UP; SXP1-UP)
- 795FSeries AC (S/N: ERM1-UP)
- 797F (S/N: LAJ1-UP; WSP1-UP)
ReferenceSpecial Instruction, REHS7413, "Installation Guide for Cat® Fleet Onboard System"
New firmware update is now available for low precision Satellite Receiver Gp (GPS) used on certain machines that are listed above. The new firmware is compatible with VIMS 3G system and addresses VIMS buffer issues on the machines.
Note: The 304-3928 Satellite Receiver Gp (GPS) with the change level 00 should not be used with the VIMS 3G system.
Show/hide table
Illustration 1 | g03350439 |
(1) The change level 01 indicating firmware update |
The new firmware update for low precision 304-3928 Satellite Receiver Gp (GPS) can be identified by the change level of 304-3928 Satellite Receiver Gp. Refer to Illustration 1.
The new firmware update part number is listed in Table 1.
Show/hide table
New Firmware Update     | ||
Part Number     | Description     | Change Level     |
304-3928     | Satellite Receiver Gp (GPS)     | 01     |
Caterpillar Information System:
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408} Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
MH3049 Material Handler Hydraulic System Swing Pump
Voiding of The Lift Cylinders On Single Tilt F Series Backhoe Loaders{5051, 5102} Voiding of The Lift Cylinders On Single Tilt F Series Backhoe Loaders{5051, 5102}
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Window Wiper Motor - Remove and Install
C27 and C32 Tier 4 Final Marine Engines Vibration Damper and Pulley
2013/03/26 A New Plate Assembly Is Now Used on Certain Vibratory Asphalt Compactors {7253}
Load Haul Dump Machines Vital Information Management System (VIMS)TM System Schematic
Load Haul Dump Machines Vital Information Management System (VIMS)TM Power Supply Circuit of Electronic Control Module
Load Haul Dump Machines Vital Information Management System (VIMS)TM MID 161 - CID 1089 - FMI 14
Load Haul Dump Machines Vital Information Management System (VIMS)TM MID 161 - CID 0890 - FMI 09
Load Haul Dump Machines Vital Information Management System (VIMS)TM MID 161 - CID 0800 - FMI 11
Load Haul Dump Machines Vital Information Management System (VIMS)TM MID 161 - CID 0246 - FMI 14
2013/03/08 New Power Train Software Is Now Available For Certain 793F and 797F Off-Highway Trucks {7620}
Installation of 359-3176 Pivot Bearing and the 433-6434 Plate Assembly on Certain Vibratory Asphalt Compactors{7253} Installation of 359-3176 Pivot Bearing and the 433-6434 Plate Assembly on Certain Vibratory Asphalt Compactors{7253}
Installation and Configuration of Cat® Terrain v5.0 On-board Software{7605} Installation and Configuration of Cat® Terrain v5.0 On-board Software{7605}
2013/03/04 New Governor Actuator Adjustment Procedure Now Used on R1300G Load Haul Dump Machines {1265, 1716}
C1.5 and C2.2 Engines for Caterpillar Built Machines Air in Fuel - Test
2013/03/18 Improved 431-5438 Shaft Kit for the Armrest on Certain Wheel Feller Bunchers {7324}
14M Series 3 Motor Grader Maintenance Interval Schedule
2013/03/01 Improved Bolts Now Used on Bunching Finger and Grapple Arm Cylinder Glands on Felling Heads {5362, 5555, 6307}
2570C and 2670C Wheel Feller Bunchers Parking Brake Manual Release
MH3049 Material Handler Machine Systems Cab Riser Cylinder - Remove and Install - Forward/Back Cylinders
986H Wheel Loader Machine Systems General Information (Brake, Hydraulic Fan System)
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Configuration Menu