Procedure To Clean High Performance Marine Engine Air Filter{0374,1054}
Usage:
3408B (8RG),
3412 (3JK) Marine Engines
Reference: Special Instruction, Form No. SEHS9541, "3408 and 3412 High Performance Marine Engine Maintenance And Cleaning Of Air Filters"
The Reference Special Instruction identifies the cleaning kits and describes the procedure used to clean and recondition the air filters on the above engines.
Caterpillar Information System:
1992/11/30 Procedure To Replace Cylinder Head Gasket{1124}
1992/11/30 New Fuel Priming Pump Kit Available{1258}
1992/11/30 Left Handed Threads In Compressor Nut On Some Caterpillar Turbochargers{1077,1053,1052}
1992/11/30 New Oil Pump Used As Service Replacement{3310}
1992/11/30 New Unit Injector Sleeve Used In Cylinder Head Groups{1125}
1992/11/30 New Cylinder Head Gasket Used{1124}
1992/11/30 Reporting Incidents{0337}
1992/11/23 Oil Filter Group Improved{1318}
1992/11/23 Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23 New Service Seal Used In Altronic III Magnetos{1552}
1992/11/23 Procedure For Seating The Ball In The Fuel Return 4L8546 Check Valve{1274}
1992/11/23 Supplemental Coolant Additive Requirements{1352,1395,1063}
1992/11/30 New Cast Iron Deaerators Replace Former Aluminum Deaerators{1350}
1992/12/21 New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21 Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21 New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1993/01/18 New Videotape "Detection of Air and Combustion Gases in the Cooling System" Available {0374,1350}
1993/01/18 Part Number References For 0R2818, 0R2819, And 0R3231 Remanufactured 3208 Truck Engines {0374}
1993/01/18 Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18 New And Remanufactured Fuel Injector Reference {1290}
1993/01/18 New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18 New Exhaust Manifold Group Will Help Reduce Vibration On Bellows {1059}
1993/01/18 New Cylinder Head Group Used To Help Reduce The Amount Of Oil On The Valve Stems {1102,1109,1104}
1993/01/25 New Connecting Rod Bearing Used In Piston And Rod Groups {1219}