New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
Usage:
3500 Family Of Engines
Description of Change: New grommets with higher temperature capacity are used in the clamp assemblies. The new grommets have a temperature capacity of up to 204°C (400°F).
Adaptable To: The chart identifies the clamp assembly components.
Caterpillar Information System:
1993/01/18 New And Remanufactured Fuel Injector Reference {1290}
1993/01/18 Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18 Part Number References For 0R2818, 0R2819, And 0R3231 Remanufactured 3208 Truck Engines {0374}
1993/01/18 New Videotape "Detection of Air and Combustion Gases in the Cooling System" Available {0374,1350}
1992/12/21 New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21 Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21 New Cylinder Head Bolt Tightening Procedure{1100}
1992/11/30 New Cast Iron Deaerators Replace Former Aluminum Deaerators{1350}
1992/11/30 Procedure To Clean High Performance Marine Engine Air Filter{0374,1054}
1992/11/30 Procedure To Replace Cylinder Head Gasket{1124}
1992/11/30 New Fuel Priming Pump Kit Available{1258}
1992/11/30 Left Handed Threads In Compressor Nut On Some Caterpillar Turbochargers{1077,1053,1052}
1993/01/18 New Exhaust Manifold Group Will Help Reduce Vibration On Bellows {1059}
1993/01/18 New Cylinder Head Group Used To Help Reduce The Amount Of Oil On The Valve Stems {1102,1109,1104}
1993/01/25 New Connecting Rod Bearing Used In Piston And Rod Groups {1219}
1993/01/25 Special Instruction For Installing VR3 Voltage Regulator On SR4 Generators Now Available {4450}
1993/01/25 Drive End Bearing Service For 50/75 Amp Brushless Alternators {1405}
1993/01/25 Unit Injector Tip Seal Deterioration {1290}
1993/01/25 Check Engine Water Pump Impeller Face Clearance If The Engine Experiences Symptoms Of Overheating {1361}
1993/02/01 New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/08 Maintenance Tips For 6I0799 Exhaust Restrictor; Additional Spring Improves Performance Of 6I0799 Exhaust Restrictor{1119,1061,1088}
1993/02/15 Procedure To Determine Idler Height {4159}
1993/02/15 Aftercooler Core And Turbocharger Compressor Wheel Cleaning Interval {1317,1052,1054,1060}
1993/02/15 New Breather Group And Fumes Disposal Group Help Reduce Oil In Blow-By Fumes {1317}