1992/11/30 Caterpillar

New Fuel Priming Pump Kit Available{1258}

Usage:

3116 (7SF, 2BK) Truck Engines

SUPPLEMENT: 03/08/93

Service Magazine; November 30, 1992; Page 10; "New Fuel Priming Pump Kit Available" for 3116 (7SF, 2BK) Truck Engines.

Disregard this article. Make note of the article with the title "New Fuel Priming Pump Kits Available" in this issue.

--------------- END SUPPLEMENT ---------------

Reference: Special Instruction, Form No. SEHS9543, "Installing the 1011536 Fuel Priming Pump Kit"

A new fuel priming pump kit is available. The installed kit can help remove air from the fuel system after filter changes or other fuel system maintenance.

The new 1011536 Fuel Priming Pump Kit is adaptable to all the above truck engines. The kit includes the Reference Special Instruction. The Special Instruction provides complete information on the serviceable components of the kit, installation of the kit, and priming procedures.

Caterpillar Information System:

1992/11/30 Left Handed Threads In Compressor Nut On Some Caterpillar Turbochargers{1077,1053,1052}

1992/11/30 New Oil Pump Used As Service Replacement{3310}

1992/11/30 New Unit Injector Sleeve Used In Cylinder Head Groups{1125}

1992/11/30 New Cylinder Head Gasket Used{1124}

1992/11/30 Reporting Incidents{0337}

1992/11/23 Oil Filter Group Improved{1318}

1992/11/23 Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}

1992/11/23 New Service Seal Used In Altronic III Magnetos{1552}

1992/11/23 Procedure For Seating The Ball In The Fuel Return 4L8546 Check Valve{1274}

1992/11/23 Supplemental Coolant Additive Requirements{1352,1395,1063}

1992/11/23 New Gasket And Plate Used In Front Housing Group To Help Prevent Oil Leaks{1151}

1992/11/16 New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence{1124,1221,1216}

1992/11/30 Procedure To Replace Cylinder Head Gasket{1124}

1992/11/30 Procedure To Clean High Performance Marine Engine Air Filter{0374,1054}

1992/11/30 New Cast Iron Deaerators Replace Former Aluminum Deaerators{1350}

1992/12/21 New Cylinder Head Bolt Tightening Procedure{1100}

1992/12/21 Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}

1992/12/21 New Bellows Assemblies Used In Turbocharger Groups{1052,1059}

1993/01/18 New Videotape "Detection of Air and Combustion Gases in the Cooling System" Available {0374,1350}

1993/01/18 Part Number References For 0R2818, 0R2819, And 0R3231 Remanufactured 3208 Truck Engines {0374}

1993/01/18 Cylinder Pack Puller Groups Improved {0705,1239}

1993/01/18 New And Remanufactured Fuel Injector Reference {1290}

1993/01/18 New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}

1993/01/18 New Exhaust Manifold Group Will Help Reduce Vibration On Bellows {1059}