Pump Control Valve - Power Compensator
Show/hide table
 | |
| Illustration 1 | g01626354 |
(1) Torque for the plug ... 40 N·m (30 lb ft)
(2) Torque for the nut ... 15.5 N·m (11 lb ft)
(3) Torque for the bolt ... 15.5 N·m (11 lb ft)
Caterpillar Information System:
MINEGEM Machine Control ; Guidance Products General Hazard Information
430E Backhoe Loader Water Pump - Remove and Install
430E Backhoe Loader Fan - Remove and Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Assemble
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Disassemble
430E Backhoe Loader Alternator - Remove and Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Relief Valve (Line) - Test and Adjust
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Disassemble
2008/08/25 A New Rocker Arm Assembly is Available {1123}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Manifold (Outlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Boom, Stick, Pattern Switch)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Inlet)
2010/08/25 A New Air Dryer is Available {1803, 4285}
430E Backhoe Loader Water Temperature Regulator - Remove and Install
PL61 Pipelayer Machine Systems Accumulator - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Disassemble
430E Backhoe Loader Stick - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Assemble
Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610} Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610}