Gear Pump (Transmission) - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.
Note: Lubricate the O-ring seals lightly with the lubricant that is being sealed.
- Use a suitable lifting device in order to install gear pump (7). The weight of gear pump (7) is approximately
45 kg (100 lb) . - Install bolts (8).
Show/hide table
Illustration 3 g01626229 - Connect hose assembly (6).
Show/hide table
Illustration 4 g01626226 - Install bolts (4) in order to connect tube assembly (5).
Show/hide table
Illustration 5 g01626221 - Connect hose assembly (3) and hose assembly (2).
Show/hide table
Illustration 6 g01626224 - Connect hose assembly (1).
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil - Change".
Show/hide table
| |
| Illustration 1 | g01626232 |
Show/hide table
| |
| Illustration 2 | g01626233 |
End By:
- Remove the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
- Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Relief Valve (Line) - Test and Adjust
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Disassemble
2008/08/25 A New Rocker Arm Assembly is Available {1123}
2008/08/25 A New Rocker Arm Assembly is Available {1123}
2008/09/08 An Improved Pressure Switch is Now Available {1435}
The All Wheel Drive May Be Malfunctioning{3030, 5479} The All Wheel Drive May Be Malfunctioning{3030, 5479}
Troubleshooting Procedure For Speed Sensors{4150, 4803, 5058} Troubleshooting Procedure For Speed Sensors{4150, 4803, 5058}
PL61 Pipelayer Power Train Piston Pump (Hydrostatic) - Install
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Install
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Remove
430E Backhoe Loader Alternator - Remove and Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Disassemble
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Assemble
430E Backhoe Loader Fan - Remove and Install
430E Backhoe Loader Water Pump - Remove and Install
MINEGEM Machine Control ; Guidance Products General Hazard Information
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Pump Control Valve - Power Compensator
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Manifold (Outlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Boom, Stick, Pattern Switch)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Inlet)
2010/08/25 A New Air Dryer is Available {1803, 4285}
430E Backhoe Loader Water Temperature Regulator - Remove and Install