Alternator - Remove and Install
Specifications
Show/hide table
Illustration 1 | g01626160 |
Voltage ... 12 V
Amperage ... 120 Amp
(1) Terminal "W"
- Tighten the terminal nut to the following torque. ... 4.5 ± .5 N·m (40 ± 5 lb in)
(2) Terminal "D+"
- Tighten the terminal nut to the following torque. ... 4.5 ± .5 N·m (40 ± 5 lb in)
(3) Terminal "B+"
- Tighten the terminal nut to the following torque. ... 10 ± 1 N·m (88 ± 8 lb in)
Removal Procedure
- Turn battery disconnect switch (1) to the OFF position.
Show/hide table
Illustration 2 | g01519298 |
- Release the tension on belt tensioner (3) in order to position belt (2) out of the way.
Show/hide table
Illustration 3 | g01519306 |
- Disconnect cable assembly (6) . Disconnect harness assemblies (5) . Remove bolt (4) and (7) . Remove alternator (8) .
Show/hide table
Illustration 4 | g01519311 |
Installation Procedure
- Install alternator (8) in the reverse order of removal.
- Tighten bolts (4) and (7) to a torque of 22 N·m (16 lb ft).
- Tighten the nuts for harness assemblies (5) to a torque of 4.5 ± 0.5 N·m (39.8 ± 4.4 lb in).
- Tighten the nut for cable assembly (6) to a torque of 10 ± 1 N·m (88 ± 8 lb in).
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Relief Valve (Line) - Test and Adjust
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Disassemble
2008/08/25 A New Rocker Arm Assembly is Available {1123}
2008/08/25 A New Rocker Arm Assembly is Available {1123}
2008/09/08 An Improved Pressure Switch is Now Available {1435}
The All Wheel Drive May Be Malfunctioning{3030, 5479} The All Wheel Drive May Be Malfunctioning{3030, 5479}
Troubleshooting Procedure For Speed Sensors{4150, 4803, 5058} Troubleshooting Procedure For Speed Sensors{4150, 4803, 5058}
PL61 Pipelayer Power Train Piston Pump (Hydrostatic) - Install
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Disassemble
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Assemble
430E Backhoe Loader Fan - Remove and Install
430E Backhoe Loader Water Pump - Remove and Install
MINEGEM Machine Control ; Guidance Products General Hazard Information
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Pump Control Valve - Power Compensator
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Manifold (Outlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Boom, Stick, Pattern Switch)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Inlet)
2010/08/25 A New Air Dryer is Available {1803, 4285}
430E Backhoe Loader Water Temperature Regulator - Remove and Install
PL61 Pipelayer Machine Systems Accumulator - Remove and Install