Fan - Remove and Install
Removal Procedure
- Release the tension on belt tensioner (1) in order to position belt (2) out of the way.
Show/hide table
Illustration 1 | g01515937 |
- Remove bolts (3) and fan guard (4) .
Show/hide table
Illustration 2 | g01515941 |
- Loosen four bolts (6) (not shown). Slide fan (5) forward and remove spacer (7) . Remove four bolts (6) (not shown). Remove fan (5) .
Show/hide table
Illustration 3 | g01515948 |
Installation Procedure
- Install fan (5) in the reverse order of removal.
- Torque bolts (3) to a torque of 19 ± 2 N·m (14 ± 1.5 lb ft).
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Assemble
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Disassemble
430E Backhoe Loader Alternator - Remove and Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Relief Valve (Line) - Test and Adjust
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Disassemble
2008/08/25 A New Rocker Arm Assembly is Available {1123}
2008/08/25 A New Rocker Arm Assembly is Available {1123}
2008/09/08 An Improved Pressure Switch is Now Available {1435}
The All Wheel Drive May Be Malfunctioning{3030, 5479} The All Wheel Drive May Be Malfunctioning{3030, 5479}
430E Backhoe Loader Water Pump - Remove and Install
MINEGEM Machine Control ; Guidance Products General Hazard Information
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Pump Control Valve - Power Compensator
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Manifold (Outlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Boom, Stick, Pattern Switch)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Inlet)
2010/08/25 A New Air Dryer is Available {1803, 4285}
430E Backhoe Loader Water Temperature Regulator - Remove and Install
PL61 Pipelayer Machine Systems Accumulator - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Disassemble