Oil Filter and Base (Transmission Charging) - Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.
Note: Lubricate the O-ring seals lightly with the lubricant that is being sealed.
- Use Tooling (A) and a suitable lifting device in order to install oil filter and base (3). The weight of oil filter and base (3) is approximately
32 kg (70 lb) . Install bolts (6).Show/hide table
Illustration 2 g01626508 - Connect elbow (5). Connect tube assembly (4).
Show/hide table
Illustration 3 g01626492 - Connect harness assembly (2). Install bolts (1).
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil - Change"
Show/hide table
| |
| Illustration 1 | g01626516 |
End By:
- Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove
PL61 Pipelayer Machine Systems Accumulator - Remove and Install
430E Backhoe Loader Water Temperature Regulator - Remove and Install
2010/08/25 A New Air Dryer is Available {1803, 4285}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Inlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Boom, Stick, Pattern Switch)
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Manifold (Outlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Pump Control Valve - Power Compensator
MINEGEM Machine Control ; Guidance Products General Hazard Information
430E Backhoe Loader Water Pump - Remove and Install
430E Backhoe Loader Fan - Remove and Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Assemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Disassemble
430E Backhoe Loader Stick - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Assemble
Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610} Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Piston Pump (Work Tool and Steering)
Salvage of Folded Core Radiators{1353} Salvage of Folded Core Radiators{1353}
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Remove
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Install
2008/12/08 Improved Pivot Kits Are Now Available For Steering Columns {4310, 4338}
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Assemble
2008/09/22 A New Electrohydraulic Control Group is Available {5702, 5705}