Oil Filter and Base (Transmission Lubrication) - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | FT-1114 | Vacuum Cap | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.
Note: Lubricate the O-ring seals lightly with the lubricant that is being sealed.
- Install filter base (7). Install bolts (6).
Show/hide table
Illustration 2 g01626565 - Connect tube assembly (5) and tube assembly (4).
Show/hide table
Illustration 3 g01626605 - If filter housing (3) was removed, install filter housing (3). Connect harness assembly (1).
Show/hide table
Illustration 4 g01606514 - Remove Tooling (A).
Show/hide table
| |
| Illustration 1 | g01626567 |
End By:
- Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Remove
Salvage of Folded Core Radiators{1353} Salvage of Folded Core Radiators{1353}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Piston Pump (Work Tool and Steering)
Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610} Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610}
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Assemble
430E Backhoe Loader Stick - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove
PL61 Pipelayer Machine Systems Accumulator - Remove and Install
430E Backhoe Loader Water Temperature Regulator - Remove and Install
2010/08/25 A New Air Dryer is Available {1803, 4285}
2008/12/08 Improved Pivot Kits Are Now Available For Steering Columns {4310, 4338}
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Assemble
2008/09/22 A New Electrohydraulic Control Group is Available {5702, 5705}
430E Backhoe Loader Electric Starting Motor - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Hydraulic Pump - Test and Adjust
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Hydraulic Pump - Test and Adjust
2008/09/08 Latest Engine Software and Injectors are Available {1251, 1290, 7620}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Sideshift)
785D OEM Off-Highway Truck Power Train Transmission Planetary and Transfer Gears - Remove
785D OEM Off-Highway Truck Power Train Transmission Planetary and Transfer Gears - Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Worksheets - Troubleshoot