Oil Filter and Base (Transmission Charging) - Assemble
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.
Note: Lubricate the O-ring seals lightly with the lubricant that is being sealed.
- Install O-ring seal (13). Install O-ring seal (12).
Show/hide table
Illustration 2 g01262173 - Install element assembly (11).
Show/hide table
Illustration 3 g01262170 - Install retainer (10).
Show/hide table
Illustration 4 g01262167 - Install element assembly (9).
Show/hide table
Illustration 5 g01262165 - Install O-ring seal (8) onto retainer (7).
Show/hide table
Illustration 6 g01262164 - Install retainer (7). Install nut (6). Tighten nut (6) to a torque of
15.0 ± 5.4 N·m (11 ± 4 lb ft) .Show/hide tableIllustration 7 g01262160 - Install cover (5).
Show/hide table
Illustration 8 g01262154 Show/hide tableIllustration 9 g01262156 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install spring (4).
- Install spool (3).
- Install switch (2). Tighten switch (2) to a torque of
80 ± 10 N·m (59 ± 7 lb ft) .Show/hide tableIllustration 10 g01626519 - Install bracket (1).
Show/hide table
Illustration 1 | g01262174 |
End By:
- Install the transmission oil filter and base. Refer to Disassembly and Assembly, "Oil Filter and Base (Transmission Charging)- Install".
Caterpillar Information System:
430E Backhoe Loader Stick - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove
PL61 Pipelayer Machine Systems Accumulator - Remove and Install
430E Backhoe Loader Water Temperature Regulator - Remove and Install
2010/08/25 A New Air Dryer is Available {1803, 4285}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Inlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Boom, Stick, Pattern Switch)
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Manifold (Outlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Pump Control Valve - Power Compensator
MINEGEM Machine Control ; Guidance Products General Hazard Information
Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610} Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Piston Pump (Work Tool and Steering)
Salvage of Folded Core Radiators{1353} Salvage of Folded Core Radiators{1353}
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Remove
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Install
2008/12/08 Improved Pivot Kits Are Now Available For Steering Columns {4310, 4338}
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Assemble
2008/09/22 A New Electrohydraulic Control Group is Available {5702, 5705}
430E Backhoe Loader Electric Starting Motor - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Hydraulic Pump - Test and Adjust
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Hydraulic Pump - Test and Adjust