Oil Filter and Base (Transmission Charging) - Disassemble
Start By:
- Remove the transmission oil filter and base. Refer to Disassembly and Assembly, "Oil Filter and Base (Transmission Charging) - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bracket (1).
Show/hide table
Illustration 2 g01262156 Show/hide tableIllustration 3 g01262154 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove switch (2).
- Remove spool (3).
- Remove spring (4).
Show/hide table
Illustration 4 g01262160 - Remove cover (5).
Show/hide table
Illustration 5 g01262164 - Remove nut (6). Remove retainer (7).
Show/hide table
Illustration 6 g01262165 - Remove O-ring seal (8) from retainer (7).
Show/hide table
Illustration 7 g01262167 - Remove element assembly (9).
Show/hide table
Illustration 8 g01262170 - Remove retainer (10).
Show/hide table
Illustration 9 g01262173 - Remove element assembly (11).
Show/hide table
Illustration 10 g01262174 - Remove O-ring seal (12). Remove O-ring seal (13).
Show/hide table
Illustration 1 | g01626519 |
Caterpillar Information System:
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove
PL61 Pipelayer Machine Systems Accumulator - Remove and Install
430E Backhoe Loader Water Temperature Regulator - Remove and Install
2010/08/25 A New Air Dryer is Available {1803, 4285}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Inlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Boom, Stick, Pattern Switch)
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Manifold (Outlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Pump Control Valve - Power Compensator
MINEGEM Machine Control ; Guidance Products General Hazard Information
430E Backhoe Loader Water Pump - Remove and Install
430E Backhoe Loader Fan - Remove and Install
430E Backhoe Loader Stick - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Assemble
Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610} Calibration of Implements Must Be Performed When Bulldozer Blade Assembly Is Installed on 836H Landfill Compactor and 834H Wheel Dozer{5051, 5078, 5705, 5736, 5737, 7610}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Piston Pump (Work Tool and Steering)
Salvage of Folded Core Radiators{1353} Salvage of Folded Core Radiators{1353}
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Remove
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Install
2008/12/08 Improved Pivot Kits Are Now Available For Steering Columns {4310, 4338}
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Disassemble
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Lubrication) - Assemble
2008/09/22 A New Electrohydraulic Control Group is Available {5702, 5705}
430E Backhoe Loader Electric Starting Motor - Remove and Install