Gear Pump (Transmission) - Disassemble
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Group | 1 |
Start By:
- Remove the transmission gear pump. Refer to Disassembly and Assembly, "Gear Pump (Transmission) - Remove".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1) in order to remove cover assembly (2) from body assembly (3).
Show/hide table
Illustration 3 g01626252 - Remove O-ring seal (4). Use Tooling (A) in order to remove lip seal (5). Remove bearings (6).
Show/hide table
Illustration 4 g01626253 - Remove manifold assembly (7).
Show/hide table
Illustration 5 g01626254 - Remove O-ring seal (8). Remove bearings (9).
Show/hide table
Illustration 6 g01626257 - Remove body assembly (10).
Show/hide table
Illustration 7 g01626258 - Remove gear (11). Remove gear (12).
Show/hide table
Illustration 8 g01626259 - Remove key (13).
- Remove body assembly (14).
Show/hide table
Illustration 9 g01626267 - Remove gear (15). Remove gear (16).
Show/hide table
Illustration 10 g01626269 - Remove O-ring seal (17). Remove key (18).
Show/hide table
Illustration 11 g01626270 - Remove O-ring seal (19). Remove shaft assemblies (20).
Show/hide table
Illustration 12 g01626271 - Remove bearings (21).
Show/hide table
| |
| Illustration 1 | g01626249 |
Show/hide table
| |
| Illustration 2 | g01626251 |
Caterpillar Information System:
430E Backhoe Loader Alternator - Remove and Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Remove
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Relief Valve (Line) - Test and Adjust
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
785D OEM Off-Highway Truck Power Train Transmission Hydraulic Control - Disassemble
2008/08/25 A New Rocker Arm Assembly is Available {1123}
2008/08/25 A New Rocker Arm Assembly is Available {1123}
2008/09/08 An Improved Pressure Switch is Now Available {1435}
The All Wheel Drive May Be Malfunctioning{3030, 5479} The All Wheel Drive May Be Malfunctioning{3030, 5479}
Troubleshooting Procedure For Speed Sensors{4150, 4803, 5058} Troubleshooting Procedure For Speed Sensors{4150, 4803, 5058}
PL61 Pipelayer Power Train Piston Pump (Hydrostatic) - Install
785D OEM Off-Highway Truck Power Train Gear Pump (Transmission) - Assemble
430E Backhoe Loader Fan - Remove and Install
430E Backhoe Loader Water Pump - Remove and Install
MINEGEM Machine Control ; Guidance Products General Hazard Information
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Pump Control Valve - Power Compensator
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Manifold (Outlet)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Boom, Stick, Pattern Switch)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold and Solenoid (Inlet)
2010/08/25 A New Air Dryer is Available {1803, 4285}
430E Backhoe Loader Water Temperature Regulator - Remove and Install
PL61 Pipelayer Machine Systems Accumulator - Remove and Install
785D OEM Off-Highway Truck Power Train Oil Filter and Base (Transmission Charging) - Remove