Use 152-7143 Cable Assembly For Flash-Programming Generator Status Control Module{4450}
Usage:
Generator Sets
Features/Benefits
-
- * Used to flash-program EMCP2+ Generator Status Control (GSC) module
- * Used with universal communications adapter cable (139-4166)
- * Requires Caterpillar ET and communication adapter (7X-1701)
- * Flash-programming only used for field updates
- * Used to flash-program EMCP2+ Generator Status Control (GSC) module
152-7143 Cable Assembly (GSC Data Cable)
Caterpillar Information System:
1999/02/01 Caterpillar Now Has Parts Support For Previously Non-Supported Custom Parts{7567}
1999/02/01 Particle Sensor Group Improved{7430}
1999/02/01 Woodward Hand Held Programmers (Control Programmers) Available For Use With Woodward 700 Series Controllers (Governor Control Groups){1930,1908}
1999/02/01 Improvements Made On Gas Engine Wiring Groups{1900,1907}
1999/02/01 New Woodward EGB13P Reverse Acting Actuator Assembly{1716}
1999/02/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}
1999/02/01 New Relief Valves Used In Prelube Lines Groups And Starting Motor Air Pressure Regulator Groups{1451,1469}
1999/02/01 Extended Life Coolant (ELC) Now Preferred For 3600 Diesel Engines{1395}
1999/02/01 New Intermittent Prelube Basic Pump Group And Bracket Assembly Used{1319}
1999/02/01 Crankshaft Oil Passage Plugs Should Be Checked For Tightness On Some Crankshafts At Engine Overhauls{1202}
1999/02/01 New Thicker Jacket Water Side Cover Help Prevent Coolant Leaks{1201}
1999/02/01 New Cylinder Head Gaskets (Combustion Rings) Available{1124}
1999/03/01 New Top Piston Rings Available {1215}
1999/03/01 Use 170-9227 Reamer Shims To Aid In Reaming 3100 Engine Injector Sleeves {1250}
1999/03/01 New Piston With 4 mm Wide Oil Ring Reduces Light Load Oil Consumption {1214,1215,1225}
1999/03/01 Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01 New Flywheel Housing Gasket For 3406 Engines {1157}
1999/03/01 Use 132-8263 Spanner Wrench To Remove And Install Terminal Assembly In Electronic Ignition System (EIS) Transformer Group {0712,1409}
1999/03/01 New Engine Pressure Sensors Available {1916,1917,1922,1923,1924}
1999/03/01 Use 146-2727 Tool Group To Monitor And Check Engine Performance On 3600 Engines {1000}
1999/03/01 New "Long Core" Aftercooler Provides Improved High Ambient Temperature Performance {1064}
1999/03/01 New O-Ring Seals Help Prevent Coolant Leaks In High Jacket Water Temperature Applications {1100,7555}
1999/03/01 Special Instructions For Converting To Hydraulic Actuator System (Hydrax) Now Available {1716}
1999/03/01 10W Hydraulic Oil Recommended For G3600 Hydraulic Actuators (HYDRAX) {5050,5095}