10W Hydraulic Oil Recommended For G3600 Hydraulic Actuators (HYDRAX) {5050,5095}
Usage:
G3606 (3XF),
G3608 (4WF),
G3612 (1YG),
G3616 (4CG) Engines
The ONLY oil that is permitted for use in G3600 hydraulic actuator (HYDRAX) systems is 10W hydraulic oil. Caterpillar recommends the use of Caterpillar Hydraulic Oil (HYDO).
The following Chart lists the part numbers and quantities of the correct hydraulic oil to use in G3600 HYDRAX systems.
Caterpillar Information System:
1999/03/01 Special Instructions For Converting To Hydraulic Actuator System (Hydrax) Now Available {1716}
1999/03/01 New O-Ring Seals Help Prevent Coolant Leaks In High Jacket Water Temperature Applications {1100,7555}
1999/03/01 New "Long Core" Aftercooler Provides Improved High Ambient Temperature Performance {1064}
1999/03/01 Use 146-2727 Tool Group To Monitor And Check Engine Performance On 3600 Engines {1000}
1999/03/01 New Engine Pressure Sensors Available {1916,1917,1922,1923,1924}
1999/03/01 Use 132-8263 Spanner Wrench To Remove And Install Terminal Assembly In Electronic Ignition System (EIS) Transformer Group {0712,1409}
1999/03/01 New Flywheel Housing Gasket For 3406 Engines {1157}
1999/03/01 Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01 New Piston With 4 mm Wide Oil Ring Reduces Light Load Oil Consumption {1214,1215,1225}
1999/03/01 Use 170-9227 Reamer Shims To Aid In Reaming 3100 Engine Injector Sleeves {1250}
1999/03/01 New Top Piston Rings Available {1215}
1999/02/01 Use 152-7143 Cable Assembly For Flash-Programming Generator Status Control Module{4450}
1999/04/01 New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999{1261}
1999/04/01 New 153-9630 Sensor Test Group Adapter Kit For DataView Now Available{1000}
1999/04/01 Use 156-1060 Gas And 156-1070 Gas And Diesel Engine Analyzer To Check Emissions{1088,0781}
1999/04/01 Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01 Use 157-3716 (Exhaust) And 157-3717 (Intake) Valve Seat Drivers To Install Valve Seats In Engines With Unfinished Valve Guides{1103,0703}
1999/04/01 New Fuel Shutoff Solenoids With Improved Durability Available{1259}
1999/04/01 Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/04/01 New Oil Pump Group Used{1304}
1999/04/01 Re-Alignment Warning Tag On All 3500 Generator Sets Reminds Of Alignment Required At Installation{1021}
1999/04/01 New Exhaust Manifold Group Seals Provides Improved Exhaust Gas Sealing{1059}
1999/04/01 Be Sure To Use The Correct Gas Fuel Pressure{1250,1270,1293}
1999/04/01 Using The Correct Diode When Using The Customer Communication Module In Multiple Engine Applications{1902,0374}