Multiple Registration Messages Occur with Product Link{733T, 7606} Caterpillar


Multiple Registration Messages Occur with Product Link{733T, 7606}

Usage:

769C 01X
Agricultural Tractor:
75 (S/N: 4CJ1-UP; 7KE1-UP; 43Z1-UP)
75C (S/N: 4KK1-UP; 3FX1-UP)
85C (S/N: 9TK1-UP)
Articulated Truck:
730 (S/N: AGF1-UP)
740 (S/N: AXM1-UP)
D250E Series II (S/N: 4PS1-UP)
D300E Series II (S/N: 5KS1-UP)
D350E Series II (S/N: 2XW1-UP)
D400E Series II (S/N: 8PS1-UP)
Backhoe Loader:
416C (S/N: 1WR1-UP)
446B (S/N: 5BL1-UP)
Combine:
Lexion 480 (S/N: 2BZ1-UP; 7ZR1-UP)
Lexion 485 (S/N: 8ZW1-UP)
Landfill Compactor:
826G (S/N: 7LN1-UP; 2GP1-UP; 41Z1-UP)
836G (S/N: 7MZ1-UP)
Soil Compactor:
825G (S/N: 6RN1-UP)
Engine:
C-9 (S/N: CLJ1-UP)
C9 (S/N: 9DG1-UP)
Excavator:
5110 (S/N: 80M1-UP)
M313C (S/N: BDR1-UP)
M315C (S/N: BDM1-UP)
M316C (S/N: BDX1-UP)
M318C (S/N: BEB1-UP; BCZ1-UP)
M322C (S/N: BDY1-UP)
Integrated Toolcarrier:
IT14G (S/N: 1WN1-UP)
IT38H (S/N: JNJ1-UP)
IT62G (S/N: 6PS1-UP; 55K1-UP)
IT62H (S/N: M5G1-UP)
Machine Control & Guidance Products:
CAES ULTRA (S/N: 2TZ1-UP)
Motor Grader:
120H (S/N: 6TM1-UP; 9YR1-UP)
12H (S/N: 5ZM1-UP; 8MN1-UP; 2GS1-UP)
135H (S/N: BDJ1-UP; 3YK1-UP)
140H (S/N: APM1-UP; 8JM1-UP)
143H (S/N: APN1-UP)
160H (S/N: ASD1-UP)
163H (S/N: ARL1-UP)
16H (S/N: ATS1-UP)
Off-Highway Truck/Tractor:
69D (S/N: 9XS1-UP)
769D (S/N: 99C1-UP)
776D (S/N: AFS1-UP)
777D (S/N: 8BR1-UP)
784B (S/N: 5RK1-UP)
785C (S/N: 5AZ1-UP)
793C (S/N: 4GZ1-UP)
775D (S/N: 8AS1-UP)
Pipelayer:
572R (S/N: 2HZ1-UP)
Track-Type Loader:
953C (S/N: 2ZN1-UP)
963C (S/N: 2DS1-UP)
973C (S/N: 3RZ1-UP)
Track-Type Tractor:
D10R (S/N: 3KR1-UP; 9EA1-UP; 4KP1-UP; 4LP1-UP; 3TT1-UP)
D11R (S/N: AAF1-UP; 8ZR1-UP; 9TR1-UP; 9XR1-UP; 5JP1-UP; 8PP1-UP; 8RP1-UP; 2GR1-UP)
D5M (S/N: 6GN1-UP; 3CR1-UP; 7LR1-UP; 5ES1-UP; 6AS1-UP; 4TF1-UP; 1CK1-UP; 4FP1-UP; 4GP1-UP)
D6K (S/N: DHA1-UP; FBH1-UP)
D6M (S/N: 3WN1-UP; 4JN1-UP; 5NR1-UP; 6LR1-UP; 4HS1-UP)
D6R Series II (S/N: AAX1-UP)
D6R (S/N: 2HM1-UP; 4FM1-UP; 8TM1-UP; 9BM1-UP; 2YN1-UP; 3ZN1-UP; 4HN1-UP; 4MN1-UP; 5LN1-UP; 6JN1-UP; 7KN1-UP; 8LN1-UP; 8XN1-UP; 9MN1-UP; 9PN1-UP; 4JR1-UP; 4TR1-UP; 4WR1-UP; 5PR1-UP; 5RR1-UP; 6FR1-UP; 6HR1-UP; 6MR1-UP; 7AR1-UP)
D6R (S/N: 7DR1-UP; 7GR1-UP; 9ZS1-UP; 1RW1-UP; 6NC1-UP; 1EH1-UP; 3SH1-UP; 1RP1-UP; 1SP1-UP; 1TP1-UP; 1WP1-UP; 1XP1-UP; 1YP1-UP; 1ZP1-UP; 3EP1-UP; 3FP1-UP; 3GP1-UP; 3HP1-UP; 3PP1-UP; 3RP1-UP; 4AP1-UP; 4BP1-UP; 6XP1-UP; 6YP1-UP; 6ZP1-UP; 8AP1-UP; 8BP1-UP; 8DP1-UP; 4TT1-UP; 08Z1-UP; 13Z1-UP)
D6T (S/N: JHB1-UP; ZEB1-UP; SMC1-UP; JWD1-UP; LBD1-UP; LAE1-UP; DJG1-UP; WCG1-UP; WFH1-UP; LKJ1-UP; SNK1-UP; DHL1-UP; KJL1-UP; SKL1-UP; KLM1-UP; GCT1-UP; RLW1-UP; LAY1-UP; RAY1-UP; PEZ1-UP)
D7R Series II (S/N: AEC1-UP)
D7R (S/N: 9HM1-UP; 2EN1-UP; 3DN1-UP; 2HR1-UP; 4SR1-UP; 5MR1-UP; 6ER1-UP; 4EB1-UP; 9EB1-UP; 4ZC1-UP; 8EH1-UP; 8GH1-UP; 8JH1-UP; 8LH1-UP; 8MH1-UP; 8NH1-UP; 8RH1-UP; 1MK1-UP; 5SP1-UP; 9KP1-UP)
D8R Series II (S/N: AKA1-UP)
D9R (S/N: ABK1-UP; ACL1-UP; 7TL1-UP; 8BL1-UP; 1LP1-UP; 1MP1-UP; 9MP1-UP; 9RP1-UP; 9SP1-UP; 48W1-UP)
Wheel Dozer:
834B (S/N: 96G1-UP)
854G (S/N: 1JW1-UP)
Wheel Loader:
924G (S/N: 3PZ1-UP)
924GZ (S/N: 6YW1-UP)
938H (S/N: MCC1-UP; MJC1-UP; JKM1-UP; LKM1-UP)
950G (S/N: 2JS1-UP; 4BS1-UP; 6NS1-UP; 8DS1-UP; 3JW1-UP; 5FW1-UP; 5MW1-UP; 8JW1-UP; 3AK1-UP; 6JK1-UP)
950H (S/N: N1A1-UP; M1G1-UP; J5J1-UP)
962G (S/N: 3BS1-UP; 5AS1-UP; 5RS1-UP; 9BS1-UP; 4PW1-UP; 6EW1-UP; 6HW1-UP; 7BW1-UP)
962H (S/N: N4A1-UP; M3G1-UP; J6J1-UP)
966G (S/N: AAH1-UP; 3ZS1-UP; 9RS1-UP; 3PW1-UP; 3SW1-UP; 8XW1-UP)
966H (S/N: A6D1-UP; A6G1-UP)
972G (S/N: 7LS1-UP; AAW1-UP; 1EW1-UP; 4WW1-UP; 6AW1-UP; 9GW1-UP)
972H (S/N: A7D1-UP; A7G1-UP; A7J1-UP)
980G Series II (S/N: AWH1-UP)
980G (S/N: 9CM1-UP; 2KR1-UP; 2SR1-UP)
980H (S/N: MHG1-UP; A8J1-UP; JMS1-UP)
988F Series II (S/N: 2ZR1-UP)
988G (S/N: 2TW1-UP; 7RC1-UP)
992G (S/N: 7HR1-UP)
994 (S/N: 9YF1-UP)
994D (S/N: 3TZ1-UP)
Wheel Tractor-Scraper:
621G (S/N: ALP1-UP)
627G (S/N: AXF1-UP)
631G (S/N: AWK1-UP)
633E Series II (S/N: 2PS1-UP)
637G (S/N: AXT1-UP)
657E (S/N: 6PR1-UP; 7KR1-UP)
J621 (S/N: 43H1-UP)
Work Tool:
T6B (S/N: KSK1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

Product Link is sending multiple registration messages. The messages are generated as part of the normal operation of Product Link.

The messages can be caused when either of the following conditions occur:

  • A 1250-9 diagnostic error occurs. This pertains to modules that are using software prior to v3.0. Multiple registration messages could occur due to this diagnostic.

  • The PL121 is flashed before the PL300 and a confirmation e-mail address is populated. This pertains to the following processes: registration and flashing. If these actions occur in this sequence, then three registration messages could be received.

Solution

The resolution to this problem includes the following:

  1. Update the software to v3.0.

  1. Troubleshoot the 1250-9 diagnostic. Refer to Troubleshooting, RENR7911, "MID 122 - CID 1250 - FMI 09".

  1. Contact the Dealer Solution Network (DSN) for assistance under the following conditions:

    • You are using v3.0 software and you continue to receive excessive registration messages.

    • The 1250-09 diagnostic message remains active.

    Use the following web site: http://dsn.cat.com.

    Note: A Corporate Web Security (CWS) ID is required in order to access this web site.

Caterpillar Information System:

2007/08/27 New AccuGrade ® Software is Now Available {7220, 7620}
3512, 3508 and 3516 Generator Sets Engine Oil and Filter - Change
C15 and C18 Petroleum Engines Alternator and Regulator
3176C, 3406E and 3456 Industrial Engines Engine Shutdown Is Intermittent
349F and 352F Excavators Pump Coupling Oil Level - Check
3176C, 3406E and 3456 Industrial Engines Engine Cranks but Does Not Start
Cat® Digital Voltage Regulator Generator Overcurrent - Troubleshoot
3176C Engine for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
345D, 349D and 349D2 Excavators Pump Coupling Oil - Change
2008/02/01 Repairing the Fuel Injector Rocker Arm {1102, 1123, 1290}
2007/08/01 Precautions for Cylinder Liner Installation {1201, 1216}
2007/08/27 Precautions for Cylinder Liner Installation {1201, 1216}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100} Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
2007/09/10 A New Socket for the Rocker Arm Provides Increased Lubrication for Low Load Operation {1102, 1123}
3500 Generator Sets Fuel System Secondary Filter - Replace
2007/10/08 New ECM Software Is Available for Gas Compression Applications {7620}
2007/09/01 An Improved Oil Level Gauge Is Now Used {1326}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290} The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100} Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
C3.3 Industrial Engine Fan Drive
C3.3 Industrial Engine Maintenance Interval Schedule
2007/09/10 A New Fuel Line and Hose Assembly are Used for the Fuel Cooler {1274}
2007/11/26 The Remanufactured Control Group is Incorrect for the Application {1901, 7620}
2007/11/01 The Remanufactured Control Group is Incorrect for the Application {1901, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.