2007/09/10 Caterpillar


A New Fuel Line and Hose Assembly are Used for the Fuel Cooler {1274}

Usage:

3512B MKH
Engine:
3508B (S/N: S2A1-UP; S2B1-UP; S2D1-UP; S2E1-UP; S2F1-UP)
3508C (S/N: TTA1-UP; TTB1-UP)
3512B (S/N: S2G1-UP; S2H1-UP; S2J1-UP; S2K1-UP; S2L1-UP; S2M1-UP; S2N1-UP)
3512C (S/N: TTC1-UP; TTE1-UP; TTF1-UP; MRG1-UP; TTG1-UP; MKH1-UP)
3516B (S/N: PAG1-UP; S2P1-UP; S2R1-UP; S2S1-UP; S2T1-UP; S2W1-UP; S2X1-UP; S2Y1-UP; S2Z1-UP)
3516C (S/N: TTD1-UP; TTH1-UP; TTJ1-UP)

Description of Change: A new tube and hose assembly is replacing the single tube between the fuel rail and the heat exchanger. The new design will ease installation.

Adaptable To: New brackets, tubes, and hose assemblies are contained within the 309-5092 Fuel Lines Gp and the 309-5093 Fuel Lines Gp. The former 248-8841 Fuel Lines Gp and the former 250-9261 Fuel Lines Gp have been cancelled.

The new fuel lines groups are adaptable to the engines that are listed above.




Illustration 1g01412257

Right side view 309-5092 Fuel Lines Gp and 309-5093 Fuel Lines Gp

(1) 309-5087 Tube As

(2) 0L-1143 Bolt

(3) 5M-2894 Hard Washer

(4) 9S-8752 Full Nut

(5) 4P-0692 Clamp As

(6) 5S-7383 Bolt

(7) 8T-4896 Hard Washer

(8) The 309-5092 Fuel Lines Gp contains the 309-5088 Hose As.

(8) The 309-5093 Fuel Lines Gp contains the 309-5089 Hose As.

(9) 309-5086 Bracket

(10) 6V-4362 Connector

(11) 6V-5049 O-Ring Seal




Illustration 2g01412336

Former single tube assembly




Illustration 3g01412340

New tube and hose assembly

Caterpillar Information System:

C3.3 Industrial Engine Maintenance Interval Schedule
C3.3 Industrial Engine Fan Drive
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100} Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290} The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
2007/09/01 An Improved Oil Level Gauge Is Now Used {1326}
2007/10/08 New ECM Software Is Available for Gas Compression Applications {7620}
3500 Generator Sets Fuel System Secondary Filter - Replace
2007/09/10 A New Socket for the Rocker Arm Provides Increased Lubrication for Low Load Operation {1102, 1123}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100} Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Multiple Registration Messages Occur with Product Link{733T, 7606} Multiple Registration Messages Occur with Product Link{733T, 7606}
2007/08/27 New AccuGrade ® Software is Now Available {7220, 7620}
3512, 3508 and 3516 Generator Sets Engine Oil and Filter - Change
2007/11/26 The Remanufactured Control Group is Incorrect for the Application {1901, 7620}
2007/11/01 The Remanufactured Control Group is Incorrect for the Application {1901, 7620}
G3520B Industrial Engines CAN Data Link - Test
2007/09/01 Unauthorized Engine Modification {1000}
C7 Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
C3.4 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
14L Motor Grader Gear Pump (Transmission Charging and Scavenge) - Disassemble
C18 Power Module Before Starting Engine
G3408C and G3412C Engines Piston and Rings - Gallery Cooled Piston
14L Motor Grader Gear Pump (Transmission Charging and Scavenge) - Assemble
PM3500 Power Modules Overhaul Considerations
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Log File Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.