New ECM Software Is Available for Gas Compression Applications {7620}
- Engine:
- G3512 (S/N: 7NJ1-UP)
- G3516 (S/N: 4EK1-UP)
New software for the engine ECM is now available for the above engines. The new software improves the reliability of the 196-5391 Oxygen Sensor in gas compression application.
The 169-3341 Engine Ratings Electronic Control and the 190-5999 Engine Ratings Electronic Control is replaced by the 288-2608 Engine Ratings Electronic Control.
Caterpillar Information System:
3500 Generator Sets Fuel System Secondary Filter - Replace
2007/09/10 A New Socket for the Rocker Arm Provides Increased Lubrication for Low Load Operation {1102, 1123}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100} Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Multiple Registration Messages Occur with Product Link{733T, 7606} Multiple Registration Messages Occur with Product Link{733T, 7606}
2007/08/27 New AccuGrade ® Software is Now Available {7220, 7620}
3512, 3508 and 3516 Generator Sets Engine Oil and Filter - Change
C15 and C18 Petroleum Engines Alternator and Regulator
3176C, 3406E and 3456 Industrial Engines Engine Shutdown Is Intermittent
349F and 352F Excavators Pump Coupling Oil Level - Check
3176C, 3406E and 3456 Industrial Engines Engine Cranks but Does Not Start
Cat® Digital Voltage Regulator Generator Overcurrent - Troubleshoot
3176C Engine for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
2007/09/01 An Improved Oil Level Gauge Is Now Used {1326}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290} The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100} Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
C3.3 Industrial Engine Fan Drive
C3.3 Industrial Engine Maintenance Interval Schedule
2007/09/10 A New Fuel Line and Hose Assembly are Used for the Fuel Cooler {1274}
2007/11/26 The Remanufactured Control Group is Incorrect for the Application {1901, 7620}
2007/11/01 The Remanufactured Control Group is Incorrect for the Application {1901, 7620}
G3520B Industrial Engines CAN Data Link - Test
2007/09/01 Unauthorized Engine Modification {1000}
C7 Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
C3.4 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston