2007/11/01 Caterpillar


The Remanufactured Control Group is Incorrect for the Application {1901, 7620}

Usage:

C-15 MBN
Engine:
C-15 (S/N: MBN1-UP)

Remanufactured engines are built with 10R-3571 Electronic Control Gp. The 10R-3571 Electronic Control Gp does not support J1922.

If J1922 is needed, the 10R-3571 Electronic Control Gp must be replaced with 10R-4090 Electronic Control Gp. The replacement is not covered by the warranty.

Caterpillar Information System:

2007/11/26 The Remanufactured Control Group is Incorrect for the Application {1901, 7620}
2007/09/10 A New Fuel Line and Hose Assembly are Used for the Fuel Cooler {1274}
C3.3 Industrial Engine Maintenance Interval Schedule
C3.3 Industrial Engine Fan Drive
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100} Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290} The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
2007/09/01 An Improved Oil Level Gauge Is Now Used {1326}
2007/10/08 New ECM Software Is Available for Gas Compression Applications {7620}
3500 Generator Sets Fuel System Secondary Filter - Replace
2007/09/10 A New Socket for the Rocker Arm Provides Increased Lubrication for Low Load Operation {1102, 1123}
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100} Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Multiple Registration Messages Occur with Product Link{733T, 7606} Multiple Registration Messages Occur with Product Link{733T, 7606}
G3520B Industrial Engines CAN Data Link - Test
2007/09/01 Unauthorized Engine Modification {1000}
C7 Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
C3.4 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
14L Motor Grader Gear Pump (Transmission Charging and Scavenge) - Disassemble
C18 Power Module Before Starting Engine
G3408C and G3412C Engines Piston and Rings - Gallery Cooled Piston
14L Motor Grader Gear Pump (Transmission Charging and Scavenge) - Assemble
PM3500 Power Modules Overhaul Considerations
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Log File Messages
3500 Generator Sets Air Shutoff - Test - Engines That Are Equipped with ADEM II or ADEM III Engine Control Modules (If equipped)
Copper Contamination of the Engine Oil in some 3500C Marine Engines{1000, 1348} Copper Contamination of the Engine Oil in some 3500C Marine Engines{1000, 1348}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.