Precautions for Cylinder Liner Installation {1201, 1216}
- Industrial Engine:
- C18 (S/N: EJG1-UP; WJH1-UP)
- Generator Set:
- C18 GEN SET (S/N: C6C1-UP; DKE1-UP; G4C1-UP; STD1-UP; STM1-UP; EKW1-UP)
- Marine Engine:
- C18 MARINE (S/N: CKH1-UP; CYN1-UP; C1J1-UP; J2K1-UP; KJT1-UP; NAX1-UP; NAY1-UP)
- Power Module:
- C18 POWER MODUL (S/N: X6X1-UP)
- C18 MARINE GS (S/N: MGS1-UP)
In order to avoid lower cylinder liner damage refer to the publication Disassembly and Assembly , "Cylinder Liner - Install" that is associated with the affected serial number. Apply a steady force and slowly press in the cylinder liner. The seal could be forced out of the groove or the seal could be damaged if the cylinder liner is installed too quickly.
Caterpillar Information System:
G3408C and G3412C Engines Valve Cover
Reuse and Salvage for Turbochargers {0760, 0767, 1052} Reuse and Salvage for Turbochargers {0760, 0767, 1052}
2007/08/01 Updated Procedure for Cleaning the Nozzles in the Aftertreatment Regeneration Device (ARD) {1719, 1722}
C4.4 (Mech) Industrial Engine Fuel System Pressure - Test
G3520B Industrial Engines Turbocharger Turbine Temperature Is High
Wiring the 9X-9591 Electrical Converter Gp (PULSE WIDTH MODULATED){1421, 1901, 7490} Wiring the 9X-9591 Electrical Converter Gp (PULSE WIDTH MODULATED){1421, 1901, 7490}
G3500B Engines Temperature Ratio of Coolant to Oil Is Low
143H and 163H Motor Graders Wheel Bearing Oil Sample (Front) - Obtain - If Equipped
G3520B Industrial Engines Oil Temperature Is High
G3500B Engines Oil Pressure Is High
G3520B Industrial Engines Oil Pressure Is Low
G3520B Industrial Engines Inlet Air Temperature Is High
2007/08/01 Precautions for Cylinder Liner Installation {1201, 1216}
2008/02/01 Repairing the Fuel Injector Rocker Arm {1102, 1123, 1290}
345D, 349D and 349D2 Excavators Pump Coupling Oil - Change
3176C Engine for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
Cat® Digital Voltage Regulator Generator Overcurrent - Troubleshoot
3176C, 3406E and 3456 Industrial Engines Engine Cranks but Does Not Start
349F and 352F Excavators Pump Coupling Oil Level - Check
3176C, 3406E and 3456 Industrial Engines Engine Shutdown Is Intermittent
C15 and C18 Petroleum Engines Alternator and Regulator
3512, 3508 and 3516 Generator Sets Engine Oil and Filter - Change
2007/08/27 New AccuGrade ® Software is Now Available {7220, 7620}
Multiple Registration Messages Occur with Product Link{733T, 7606} Multiple Registration Messages Occur with Product Link{733T, 7606}