Kits are Available for Servicing 105-4324 Air Starting Motor Gp {1451}
- Off-Highway Truck/Tractor:
- 776C (S/N: 2TK1-UP)
- Wheel Loader:
- 994 (S/N: 9YF1-UP)
- 776D (S/N: 5ER1-UP; AFS1-UP)
- 777C (S/N: 4XJ1-UP)
- 777D (S/N: AGC1-UP; 3PR1-UP)
- 777D HAA (S/N: 2YW1-UP; AGY1-UP)
- 784C (S/N: 2PZ1-UP)
- 785 (S/N: 8GB1-UP)
- 785B (S/N: 6HK1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP)
- 785C HAA (S/N: 5AZ1-UP)
- 789 (S/N: 9ZC1-UP)
- 789B (S/N: 7EK1-UP)
- 789C (S/N: 2BW1-UP)
- 793 (S/N: 3SJ1-UP)
- 793B (S/N: 1HL1-UP)
- 793C (S/N: 4AR1-UP; ATY1-UP; 4GZ1-UP)
- 793C XQ (S/N: CBR1-UP)
- 797 (S/N: 5YW1-UP)
- 797B (S/N: JSM1-UP)
- 994D (S/N: 3TZ1-UP)
Four new kits are available for servicing 105-4324 Air Starting Motor Gp. These kits include the most frequently needed parts for rebuilding this air starting motor.
Illustration 1 and Table 1 identify the components in 129-2253 Overhaul Kit. Illustration 1 and Table 2 identify the components in 129-2251 Seal Kit. Illustration 1 and Table 3 identify the components in 129-2252 Turbine Wheel Kit. Illustration 1 and Table 4 identify the components in 129-2254 Planetary Gear Kit .
Note: Some of the identified components are used in more than one kit.
Show/hide table
Illustration 1 | g00946122 |
Show/hide table
Components in 129-2253 Overhaul Kit     | ||
Item     | Qty     | Description     |
1     | 2     | O-Ring     |
3     | 1     | O-Ring     |
4     | 1     | Bearing     |
5     | 3     | Shaft     |
6     | 6     | Spacer     |
7     | 3     | Gear     |
8     | 3     | Bearing Assembly     |
9     | 1     | Seal     |
10     | 1     | Ring     |
11     | 1     | Bearing     |
12     | 1     | O-Ring     |
13     | 1     | O-Ring     |
Show/hide table
Components in 129-2251 Seal Kit     | ||
Item     | Qty     | Description     |
14     | 1     | Bearing     |
15     | 1     | Ring (Retainer)     |
16     | 1     | O-Ring     |
17     | 1     | O-Ring     |
18     | 1     | O-Ring     |
19     | 1     | O-Ring     |
20     | 1     | O-Ring     |
Show/hide table
Components in 129-2252 Turbine Wheel Kit     | ||
Item     | Qty     | Description     |
    | 1     | 129-2253 Overhaul Kit     |
2     | 1     | Motor     |
Show/hide table
Components in 129-2254 Planetary Gear Kit     | ||
Item     | Qty     | Description     |
5     | 3     | Shaft     |
6     | 6     | Spacer     |
7     | 3     | Gear     |
8     | 3     | Bearing Assembly     |
12     | 1     | O-Ring     |
Caterpillar Information System:
2002/12/23 Washer Pump Assemblies Must Be Primed Properly {7306}
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Operation
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Work Tool Installation and Removal
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Daily Inspection
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Plate Locations and Film Locations
574B Forwarder Transmission Gearbox Oil Sample - Obtain
574B Forwarder Hydraulic System Oil Sample - Obtain
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Specifications
574B Forwarder Grapple Damper Brake - Inspect/Adjust
574B Forwarder Grapple Damper - Lubricate
574B Forwarder Fuel System Primary Filter - Replace
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Caterpillar Approved Machines
R1300G Load Haul Dump Hydraulic System Main Hydraulic System
R1300G Load Haul Dump Hydraulic System Main Control Valve
R1300G Load Haul Dump Hydraulic System Relief Valve (Lift Circuit)
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Shutoff Valve (Axle Lock) - Remove and Install
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Fuel Tank - Remove
CB-534D and CB-564D Asphalt Compactors Steering Cylinder Ends - Lubricate
3056E Industrial Engine Cylinder Head
TH210 and TH215 Telehandlers Machine Systems Boom Cylinder - Remove and Install
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Exhaust Bypass Valve
2003/01/06 Use the New 187-0951 Lockup Clutch and Synchronizing Valve on 793C Off-Highway Trucks {3124}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Engine Oil Level - Check
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Exhaust Bypass Valve