574B Forwarder Caterpillar


Hydraulic System Oil Sample - Obtain

Usage:

574B CZZ

------ WARNING! ------

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.

----------------------


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.


Operate the machine for a few minutes before you obtain the fluid sample. This will thoroughly mix the fluid for a more accurate sample.




Illustration 1g00993614

Hydraulic sampling valve for the 554 Forwarder




Illustration 2g00946022

Hydraulic sampling valve for the 564 Forwarder and the 574B Forwarder

Note: The hydraulic sampling valve for the 564 Forwarder and the 574B Forwarder is located on the right side of the valve bank. Use the LS pressure tap port in order to obtain a fluid sample.

Reference: For more information, refer to Special Publication, PEHP6001, "How To Take A Good Oil Sample".

Caterpillar Information System:

PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Specifications
574B Forwarder Grapple Damper Brake - Inspect/Adjust
574B Forwarder Grapple Damper - Lubricate
574B Forwarder Fuel System Primary Filter - Replace
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Caterpillar Approved Machines
574B Forwarder Fuel System - Prime
574B Forwarder Final Drive Oil Sample - Obtain
574B Forwarder Engine Oil Sample - Obtain
574B Forwarder Differential Oil Sample - Obtain
574B Forwarder Cooling System Sample - Obtain
574B Forwarder Bogie Oil Sample - Obtain
3054E Industrial Engine Voltage Load Protection Module - Remove and Install
574B Forwarder Transmission Gearbox Oil Sample - Obtain
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Plate Locations and Film Locations
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Daily Inspection
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Work Tool Installation and Removal
PC205, PC206, PC210, PC305B, PC306B, PC306B XD, PC310B, PC310B XD, PC408B and PC412B Cold Planers Operation
2002/12/23 Washer Pump Assemblies Must Be Primed Properly {7306}
2003/01/20 Kits are Available for Servicing 105-4324 Air Starting Motor Gp {1451}
R1300G Load Haul Dump Hydraulic System Main Hydraulic System
R1300G Load Haul Dump Hydraulic System Main Control Valve
R1300G Load Haul Dump Hydraulic System Relief Valve (Lift Circuit)
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Shutoff Valve (Axle Lock) - Remove and Install
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Fuel Tank - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.